im trying to see what kind of results people have got with the hta35r on the buschur cast mani kit. i want to try to compare what kind of difference there is between the cast mani and tubular mani when it comes to the hta35r. please post dyno results if you have this set up. thanks!

 

i just order my buschur 35r not hta tho with the cast. see wat i can make hoping for some good numbers this winter going to send the turbo out to hta

 

bump!

 

From what I understand you will make more torque but less top end horsepower with the cast mani.
This is why I went with the tubular manifold. Jarod made a ton of power with his old set up on his cast mani...but that wasn't HTA. I guess its all what you want and where your funds are at before your purchase.

 

bump!

 

i dont have any numbers because there is no dyno close to me, but im am amazed at what kind of power this car puts down.

im trapping 100mph in the 1/8th lol

 

high 6's or low 7's on 1/8 mile?

 

Just look up threads started by David Buschur and you'll see plenty of results.

 

best ive gone is 7.04, putting the NLTS on the ecu next week and see where that gets me

 

boost? fuel? alky?

 

straight 100 octane, no alky, 27 psi

 

Normal Buschur 35r with cast mani on a mustang I put down 452 Whp on 93 and meth....you read my links about it more if you like...

 

dude that is like a 10's in the 1/4 mile.

 

Could be!....but this guy did low 11's >>> https://www.evolutionm.net/forums/sh...d.php?t=342908

 

well im trying to see what kind of difference in power there is between the tubular kit and the cast mani. buschur racing has come out with some very high hp hta 35r cars on pump gas but im wondering what kind of numbers can be made with the hta35r on pump with the cast mani. basically, just wondering if its really worth spending the extra money getting the tubular mani kit over the cast mani.