In hope of removing restriction and improving power in my setup. I went ahead and order the following parts from ETS.

ETS 4" Intercooler
ETS 2.5" Short Route Upper Intercooler Piping
ETS Small Battery Kit
ETS 4" Intake with filter
GM 3" MAF Sensor
MAF Translator (Still have not received)
Tial 50mm BOV

My current setup now:
Full Race Manifold t3
Full Race 3" Downpipe
Garrett GT3076r
Tial 44mm Wastegate
PTE 780cc injecctors

I have not road tested the car yet, due to not having maf translator, but once I get home from my cruise I will follow-up on tuning complications and power-out puts. I am hoping for more response and power.

Now on a the review. I ordered my parts from ETS for my birthday around May 1-2nd. Tom was extremely helpful, and customer service was amazing. Every time I call there wasn't a hold time or any lies about my parts.

I received the parts yesterday, the package when through 9 different UPS locations and arrived here in perfect shape. So kudos to ETS for the amazing packaging.

Only gripes, the black coating comes off extremely easy, and its been almost a month and the car still isn't running. But good news, I am leaving for a cruise tomorrow so I have a week to received the MAF translator from ETS.

Overall ETS gets two thumbs up and I would defiantly order more parts from them in the future.

******Last note, coming from the honda world intercooler piping always being aluminum. I don't understand why everyone uses stainless steel piping for intercooler piping.*******

Photos:


Old setup, very restrictive stock intake and stock maf, and stock intercooler.


New ETS stuff


ETS Intercooler, this intercooler is truly a work of art.


Installed


Installed


Fully Installed with bumper back on.

 

I'm loving it. I plan to go with this exact setup very soon (ic+gm maf).

 

Looks great. The quality of the parts look top notch!

Can wait to get my order from ETS.

Good luck.

 

A+ I plan to go with ETS for my whole intercooler setup as well!

 

Did the front crash beam still fit with the intercooler?

 

ETS is a quality company. Their LICP was probably the most painless mod I did to my car. Plan to go with either their 3" or 3.5" FMIC this summer.

 

Very nice and honest review Im wondering if the Maf is on back order?

 

ETS never seems to let anyone down ..

 

needz moar info on maf setup please!

 

The intercooler was a precise fit, and impact beam still fit!!

 

ETS FTW again and again. Their parts really do fit 100% and make for a very painless install

 

I will say this, I did have to cut the piping for the maf, so not 100 percent bolt on. But I am sure ETS could make a pipe with enough interest.

 

very nice....i had the black pipings on my IC pipings and it never came off.

 

You really need a AEM.

 

Thanks for posting the review! The install looks great and I'm sure that will produce some results so keep us posted

Tom