EPM DUMP installed
but at least it keeps me from going WOT on every open straight away i see
We're coming out with our own EPM LICP that will be gauranteed to fit. The LICP will be a true 2.5 inch all the way. We will sell the individual LICpipe and also a combo deal with our O2 Dump. Look for info in the next day or so as to price.
The fitment with so many different LICPipes has been our hardest challenge. Some of the LICPipe manufacturers do not have a standardized fixture for 100 exact fitment for every single part they produce. We have seen brand "X" LICP fit perfectly to only see brand "X" LICP barely touch our O2 Dump wastegate tube. These are fortunately out of the ordinary but none-the-less we want Perfect fitment; hence our own LICPipe.
Stay Tuned--->
The fitment with so many different LICPipes has been our hardest challenge. Some of the LICPipe manufacturers do not have a standardized fixture for 100 exact fitment for every single part they produce. We have seen brand "X" LICP fit perfectly to only see brand "X" LICP barely touch our O2 Dump wastegate tube. These are fortunately out of the ordinary but none-the-less we want Perfect fitment; hence our own LICPipe.
Stay Tuned--->
Thread Starter
Evolved Member
Joined: Feb 2006
Posts: 1,137
Likes: 2
From: Oxnard Ca.
or by word on the street.. just curious
On a fully built, aggressive modded Evo it might be a little too lean up top. But for any everyday modest modded Evo the lean condition will be well within limits. However; most everyone that installs the EPM O2 Dump gets a tune instantly. You will see good gains with just the O2 Dump but to get the full potential you will need a Tune. Lastly for most of those that install the O2 Dump without a tune you will be ok. I would just want to recommend that an agressive(FP RED/green, Head Work, Big Cams, Meth, etc..) modded Evo get a tune.Everybody else will be ok if they were well within limits before installing the O2 Dump. If you had a good tune before the O2 Dump then you'll be fine after it.
I presently am interested in purchasing a V1 from a fellow evoM member. I currently have the stock FMIC along with the Injen LICP. Will the V1 work? Also, if it does work, what upgraded FMIC can I purchase that the V1 compliments? Thanks!
