Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

need advice on a problem

Thread Tools
 
Search this Thread
 
Old Apr 15, 2009 | 02:00 PM
  #1  
evo_gerard's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 149
Likes: 0
From: Trinidad & Tobago
need advice on a problem

last christmas i destroyed cylinder 1 while runnin hard on the highway. blew the tip of the spark plug clean off and damaged the piston. so the head came off. i noticed that cylinders 2-4 looked good. it still had the factory cross hatch (i was kinda shocked cuz the engine has 110,000 km on it). intake runner no. 1 was extremely clean. anyway that was that. so i recently changed my plugs and found that my no. 1 plug looks a lil more worn. (i'm runnin br8eix) luckily i never throw away my old plugs. what i realize is that all my no.1 plugs are worn a bit more. im a bit worried now. im wondering now if i have a no. 1 injector that is playin the fool. is this possible or is it something else???

also, while watchin my old sets of plugs i also realize that all my no. 2 plugs have a smokey impression on the end that goes into the coil. is this normal? is my coil failing???

any advice will be greatly appreciated.
Reply
Old Apr 16, 2009 | 02:57 PM
  #2  
evo_gerard's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Jul 2007
Posts: 149
Likes: 0
From: Trinidad & Tobago
bump
Reply




All times are GMT -7. The time now is 04:37 AM.