Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

No ignition signal...I cant crank the car

Thread Tools
 
Search this Thread
 
Old Apr 18, 2009 | 10:06 AM
  #1  
PHIL_N_THE_EVO's Avatar
Thread Starter
Newbie
 
Joined: Jan 2008
Posts: 38
Likes: 0
From: Georgia
No ignition signal...I cant crank the car

I just had my car shipped to germany and I dont have a local tuner at the moment. I think I might be victim to fool play but all of the sudden my car does not start. I have changed out the ignition parts aside from the spark plugs because I found out that I dont have an ignition signal. I have an AEM EMS and I am looking for tips or a direction to go in so I can maybe fix my car. I plan to use a voltmeter to try and trace the signal in the mean time. Thanks for the help.
Reply
Old Apr 18, 2009 | 10:25 AM
  #2  
MRfabolous's Avatar
Evolved Member
iTrader: (17)
 
Joined: Oct 2007
Posts: 643
Likes: 0
From: Maryland
try and see if your cam sensors are plugged in they control sprak and fuel, did you test and see if you had spark.
Reply
Old Apr 18, 2009 | 02:28 PM
  #3  
WHTEVO's Avatar
Evolved Member
20 Year Member
iTrader: (18)
 
Joined: Apr 2004
Posts: 1,307
Likes: 0
From: COLORADO
Check your crank angle sensor and make sure it is plugged in. The plug for it is on the back left side of the valve cover. Good luck.

Aaron
Reply




All times are GMT -7. The time now is 08:46 PM.