Does any one have a compression map from the red turbo??




Thanks

 

Nope, this information is not avalible.

 

Its a 65lb/min turbo, and it gets full boost at approx 3500-3800rpm. It can handle up to 60psi and pulls till redline.... is that what you were looking for since the maps non existent from fp like above poster stated.

 

Thanks for the reply

And 65lb/min at what boost??

Thanks Filly

 

its a 57lb wheel. that is from FP website

 

doesn't say 57lb/min anywhere on this link http://store.forcedperformance.net/m...e=Lancer-Turbo

make sure you're looking at the evo 9 FP RED not the dsm one. they are 2 completely different monsters.

 

call forcedperformance and ask them for the details.. im guessing with the red it would require around 35psi to see in the 50-60 range. The red likes a lot of boost, so if you plan on running below 25psi then the turbo isn't gonna shine.

 

Thanks

Will run 30 psi hoping for 500 :-)

 

you have to extrapolate a little. here is same wheel but in standard rotation.
http://store.forcedperformance.net/m..._Code=Turbo-FP

here is same wheel again but called a green for the suby turbos. I asked robert about why he rates it 56 for the suby guys but 57 for evo guys. he said the suby guys need help at making good numbers. he didnt want to over inflate the rating for them.
http://store.forcedperformance.net/m..._Code=Turbo-FP