well I am getting ready to remove the head off the block, Does any one know of any how to videos, or how to guide on this I dont want to go at it with out have some basic knowledge as to what the heck I am doing, thanks for any help or advise

 

any buddy some help please !

 

Don't tackle a job like that without a proper manual. You can get the factory service manual on cd rom from ebay for $10.

I picked one up myself, shipping was a little slow but it got here.

 

ya i have to get this thing off like tomorrow i have basic knowledge but could use some help

 

Hell you can get the FSM online.

In fact:

http://www.lilevo.com/mirage/EVO%208...al/xEvo8/Evo8/

It's going to be a pain in the *** bro. Pull everything off of the intake manifold, all lines, coolant hoses off the throttle body, timing belt off, unplug most of the sensors. Lots of work. Get good at it and you can do it in an hour or so.

 

Its a pain in the a**. Much easier if you have an engine lift. Good luck. LABEL EVERYTHING.