Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Car won't go into gear. Help!

Old Jan 16, 2010 | 08:31 PM
  #1  
nevo24's Avatar
Thread Starter
Newbie
iTrader: (3)
 
Joined: May 2008
Posts: 74
Likes: 0
From: AZ
Car won't go into gear. Help!

Went to a restaurant tonight. no problems with the car, i came back out after an hour and the problems started. Went to start the car, the clutch pedal felt really loose, i barley pushed down on it and it just fell to the floor. There was no resistance on the pedal, i had to push it back up with my foot. Car wont go into gear. Try to put it in reverse and it just grids. Car will start by engaging the clutch, but nothing else. Has anyone else out there had simular problems or might know what the problem could be? Thanks!
Reply
Old Jan 16, 2010 | 10:52 PM
  #2  
psphinx81's Avatar
Evolved Member
iTrader: (38)
 
Joined: Apr 2005
Posts: 1,597
Likes: 2
From: Buffalo, NY
what kind of clutch etc would help..

any recent work that was just done to the car?
Reply
Old Jan 16, 2010 | 11:32 PM
  #3  
project_skyline's Avatar
Evolved Member
15 Year Member
iTrader: (30)
 
Joined: Jun 2007
Posts: 2,532
Likes: 1
From: Colorado
Sounds like TOB came out.
Reply
Old Jan 17, 2010 | 12:14 AM
  #4  
FX11's Avatar
Evolved Member
iTrader: (10)
 
Joined: Oct 2007
Posts: 545
Likes: 1
From: NY & SC
do a bit of researching, plenty of cases that relate exactly to this

check slave/master cylinder lines and all other accessories before you tear anything apart
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:44 PM.