Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

*2010 Tial QR* Vid

Thread Tools
 
Search this Thread
 
Old Feb 25, 2010 | 04:41 PM
  #1  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
*2010 Tial QR* Vid

Ok, sorry it took me a while to get these uploaded, but here it is. You all will laugh when you hear me, but I sound drunk as **** cause I'm trying to hold the camera, turn to merge into traffic. The windows are up, but the sound is muffled when I try to take a vid with them down.

http://www.youtube.com/user/ravnos04.../0/7pBCZktUuA4
Reply
Old Feb 25, 2010 | 04:51 PM
  #2  
MJ23FE's Avatar
Evolved Member
iTrader: (3)
 
Joined: Feb 2004
Posts: 1,459
Likes: 3
From: NJ.201
Not a bad effort! You def need to have someone tape it while you drive by or something to capture the sound better.

-Jalal
Reply
Old Feb 25, 2010 | 04:52 PM
  #3  
partyboy1122's Avatar
Evolved Member
iTrader: (16)
 
Joined: Aug 2007
Posts: 816
Likes: 0
From: Hudson, NH
Price and link to one of these?
Reply
Old Feb 25, 2010 | 04:55 PM
  #4  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
Originally Posted by MJ23FE
Not a bad effort! You def need to have someone tape it while you drive by or something to capture the sound better.

-Jalal
ROFL I know, I sound retarded narrating.
Reply
Old Feb 25, 2010 | 04:56 PM
  #5  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
Originally Posted by partyboy1122
Price and link to one of these?

http://www.streettunedmotorsports.co...al_q_r_bov.htm
Reply
Old Feb 25, 2010 | 06:06 PM
  #6  
NitrousOxide's Avatar
Evolving Member
 
Joined: Dec 2008
Posts: 311
Likes: 0
From: UAE
How does this compare to the Synapse Synchronic???
Reply
Old Feb 25, 2010 | 06:06 PM
  #7  
fast2go's Avatar
Evolving Member
iTrader: (8)
 
Joined: Oct 2008
Posts: 184
Likes: 1
From: Spring Hill Florida
From what I can hear it sounds good. Get some videos from outside the car.
Reply
Old Feb 26, 2010 | 03:20 PM
  #8  
raytrix's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2008
Posts: 1,028
Likes: 2
From: Chicago, IL
did you have to weld that flange to your intercooler pipe to fit that BOV or was there a way to fit inlet side to the stock silicon hose?
Reply
Old Feb 26, 2010 | 03:42 PM
  #9  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
Originally Posted by raytrix
did you have to weld that flange to your intercooler pipe to fit that BOV or was there a way to fit inlet side to the stock silicon hose?
The Tial QR is interchangeable with any Tial BOV so I just took the VTA off and clamped this one on and connected the rubber hose to the outlet. There is an aluminum flange as well as the steel one.
Reply
Old Feb 26, 2010 | 03:49 PM
  #10  
Boltz.'s Avatar
Evolved Member
FCOTM Winner
iTrader: (42)
 
Joined: Aug 2005
Posts: 2,502
Likes: 0
From: St. Charles, IL
Who cares how it sounds. I want to see you do a part throttle (~25%) roll into boost in like 3rd or 4th gear and hold the throttle position constant while turbo turbo spools up and slowly dies off. This is where most BOV's start bucking and acting a fool.

Thanks
Reply
Old Feb 26, 2010 | 04:06 PM
  #11  
1 VIOLENT EVO's Avatar
Newbie
 
Joined: Oct 2009
Posts: 57
Likes: 0
From: Houston
Originally Posted by Boltz.
Who cares how it sounds. I want to see you do a part throttle (~25%) roll into boost in like 3rd or 4th gear and hold the throttle position constant while turbo turbo spools up and slowly dies off. This is where most BOV's start bucking and acting a fool.

Thanks

ya would love to see that video, now that he posted this one he kinda owe's it to us lol
Reply
Old Feb 26, 2010 | 04:10 PM
  #12  
EmeryatSTM's Avatar
Former Sponsor
iTrader: (79)
 
Joined: Jun 2007
Posts: 2,340
Likes: 5
From: Rochester, NY
We are putting one on a 1g dsm now and will have it on the dyno soon. I will take video of that as soon as its strapped down.


-Em
Reply
Old Feb 26, 2010 | 08:34 PM
  #13  
MOREPSiTEHBETT4's Avatar
Evolved Member
 
Joined: May 2008
Posts: 697
Likes: 1
From: Mitchigan
can't hear it...
Reply
Old Feb 27, 2010 | 10:01 AM
  #14  
raytrix's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2008
Posts: 1,028
Likes: 2
From: Chicago, IL
Originally Posted by ravnos04
The Tial QR is interchangeable with any Tial BOV so I just took the VTA off and clamped this one on and connected the rubber hose to the outlet. There is an aluminum flange as well as the steel one.
I'm still confused as to what you just said. I think it's best to take a pic of your connections so I can get an idea of how you installed it.
Unless your talking about already having a special intercooler pipe with the BOV flange already incorporated on the pipe itself and all you did was take off the original Tial and put the new Tial QR in place on that same flange. Then that makes sense.
Reply
Old Feb 27, 2010 | 10:12 AM
  #15  
Fast_Freddie's Avatar
Evolved Member
Veteran: Navy
iTrader: (50)
 
Joined: Jun 2007
Posts: 2,706
Likes: 15
From: Lexington Park, MD
I wanna see if this has part throttle flutter before I go dumping $260 into a new BOV.
Reply



All times are GMT -7. The time now is 03:16 PM.