Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Where should my in/HG be at?

Thread Tools
 
Search this Thread
 
Old Mar 5, 2010 | 11:06 AM
  #1  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
Where should my in/HG be at?

Hey,

I was reading that with 272 cams, people see anywhere from 15-19in/HG. With my mods I am seeing like 11-15in/HG. Is this normal for my setup? I also noticed couple of days ago that the EGR is removed and replaced with a block plate.
Reply
Old Mar 5, 2010 | 11:16 AM
  #2  
Kracka's Avatar
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
11-15 in/Hg sounds about right. I see 10-12 with my FP4R's @ 1,000 rpm idle.
Reply
Old Mar 5, 2010 | 11:18 AM
  #3  
20gmr's Avatar
Evolved Member
iTrader: (7)
 
Joined: Jan 2007
Posts: 874
Likes: 1
From: hershey pa/williamsport
was the car tuned for cams? Improving the idle quality will also yield a little higher vac. 11-15 doesn't sound outragous or concerning. How much will it make in decel?
Reply
Old Mar 5, 2010 | 01:40 PM
  #4  
ravnos04's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2009
Posts: 360
Likes: 0
From: Springs, Co
Originally Posted by 20gmr
was the car tuned for cams? Improving the idle quality will also yield a little higher vac. 11-15 doesn't sound outragous or concerning. How much will it make in decel?
I'm assuming so because my tuner knows I have cams and that my EGR is removed. I idle at like 1k RPM with AFR's between 15.2-15.7
Reply




All times are GMT -7. The time now is 07:24 PM.