EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Kelford 272 cams Threaded wrong?

   
Old Jul 30, 2011 | 12:44 PM
Share
  #1  
evo8matt's Avatar
evo8matt
Thread Starter
Newbie
 
Joined: Jul 2011
Posts: 20
Likes: 0
From: Boyertown, PA.
Question Kelford 272 cams Threaded wrong?
I just went to install my kelford 272's in my evo 8 and the threaded whole for the CAS is threaded M12x1.25. The bolt that came out of the original cam is no bigger tha 8mm. WTF!!! Is this normal? I managed to get a bolt but had to use a thin wall socket for it to fit in the CAS.... What is the deal, please give me your thoughts!!!
Reply
0
Old Jul 30, 2011 | 01:22 PM
Share
  #2  
sktng22's Avatar
sktng22
Evolved Member
iTrader: (3)
 
Joined: Apr 2007
Posts: 722
Likes: 0
From: Northern NJ
my cas sensor bolt fit fine in my kelford 272's thats weird
Reply
0
Old Jul 30, 2011 | 07:11 PM
Share
  #3  
evo8matt's Avatar
evo8matt
Thread Starter
Newbie
 
Joined: Jul 2011
Posts: 20
Likes: 0
From: Boyertown, PA.
The hole on both sides are threaded for say the cam gear, both are the exact same.... so im thinking manufacture defect
Reply
0
Tags
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
temp sensor in the thermo housing?


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -7. The time now is 05:49 AM.