As per the Buschur Web site: BR Evo 3" Magnaflow Muffler Rear Section $250.00

Wanting to replace your original Bullet muffler with a quiter design on your Buschur Racing exhaust? If so then this is for you! This includes the new Magnaflow muffler, 4" tip, s.s. hanger, hardware, and a new 3" exhaust clamp. The Magnaflow muffler offers the same great flow as our original but a with a more mellow, quieter tone.

 

OK. And this would take care of everything "south" from my BR test pipe, right?

 

https://secure.buschurracing.com/cat...oducts_id=1522 magnaflow

https://secure.buschurracing.com/cat...roducts_id=721 bullet muffler

I think this is what you are looking for if you already have the downpipe and test pipe (offroad pipe). I think the bullet is the loudest of the two

Everything is included that you will need for installation if you're using our 3" highflow cat, off-road pipe (for race use only) or another companies slip-fit offering. If you require a 2 bolt exhaust on your catback please look at our SCCA catback which is the same catback but with a 2 bolt flange which will bolt up to the stock cat or other aftermarket 2 bolt items.

 

It's snowing here? Weird.. I don't see any. Currently at the AMC's MWR.. But it has rained the past two days :P.


Ahh StarScrm beat me to the link. Back to browsing through random threads being bored on deployment.

 

On the mountains surrounding BAF is close enough for me. We should link up and talk EVO stuff from time to time.

 

Awesome. Thank you, my friend.

 

/Offtopic, lol
Haha I would enjoy that.. However I was just down here for MRV class. Heading back up to Dehdadi II VERY shortly . But it's looking as though I may be back down here soon for the JRaDS class.. who knows. But if I come down I'll definitely shoot you a PM and we can hang out and talk Evo.

 

Sounds fantastic. Let me know, my friend.

 

NP, I was going through the same thing

 

Thank you. It is good to see that I am not alone.

 

What if you had a downpipe and test pipe of another manufacturer and you wanted to add a buschur rear section. Are most flanges/angles universal, or would it require welding?

 

I cannot speak for all brands. When I had my old EVO, I had the APS downpipe and a makeshift testpipe matched to the BR billet muffler. I did have the muffler welded instead of using the slip-fit set up.

 

https://secure.buschurracing.com/cat...oducts_id=1521

I think if the other test pipe has a 2 bolt flange then the SCCA Legal catback is what you would need.

"This system WILL bolt to your factory 2 bolt exhaust flange on your cat or other companies highflow cats or off-road pipe solutions."

https://secure.buschurracing.com/cat...roducts_id=721

But the other exahust I link, the website says it will work with another companies off-road pipe if its slip fit.

Everything is included that you will need for installation if you're using our 3" highflow cat,off-road pipe (for race use only) or another companies slip-fit offering. If you require a 2 bolt exhaust on your catback please look at our SCCA catback which is the same catback but with a 2 bolt flange which will bolt up to the stock cat or other aftermarket 2 bolt items.

best bet would prolly be to call and ask if you are going to mate it when a different test pipe/downpipe

 

It definitely is something Buschur offers. I know a few people that have had it on their cars. I just wasn't sure if the OP would consider what is basically piping with a tip, a "muffler."

 

This sounds like all I will need.

That would be a sweet set up and since I do not have to worry about emissions in southern Arizona, that is even better.