Hello all,
If I had a 4g63 I'd take the measurement myself, but I don't so I thought the next best thing would be to ask the forums. I need to know the distance from the face of the flywheel hub on the crank to the tranny mating surface on the block. The picture below should serve a much better explanation.
Much thanks!

 

I will send $40 to the paypal account of the first person who takes the measurement and posts a picture as proof. The picture should look like the one above with a straight edge and caliper indicating the actual measurement. The measured distance should be readable in the photo. Please help me out!

 

I gotta ask why ?

 

I need it in order to build an adapter to run a different motor on an evo transmission.

 

The distance is approx. 16.35 mm.

 

Thanks Cogito! Great pics btw. Send me your paypal address sir!