Doing high mod on my 8 Help,
#1
Newbie
Thread Starter
Doing high mod on my 8 Help,
Sup guys, i am from Pakistan and i have an 2003 evo 8 gsr here. So i would like you guys to read my setup and kindly help me as much as you can it's very hard to do this straight in pak we don't have good fuel also.
My Setup includes:
1. ETS 3.0 intercooler
2. Build head and ported by map performance
3. GSC S3 billet cams 280
4. gt3776 turbo it's twin but going to make it single scroll
5. Full race single scroll manifold
6. 1100cc FIC high z injectors
7. ssqv 4 bov
8. bosch 400 lph fuel pump but thinking to put 2 fuel pumps
9. HKS cam gear pulley
10. Kakimoto Regu 06&R exhaust system
11. Downpipe 3 inch
12. Aem meth kit with failsafe
13. Hallman boost controller
14. Brembo slotted rotors
15. Stock throttle body
16. stock intake manifold
17. Stock block
18. Tial 44mm External wastegate
Please read the following things and telll me if you think my setup is miss matched or unreliable and how many hps would i be making. will get it tuned around 2.0 bar boost
My Setup includes:
1. ETS 3.0 intercooler
2. Build head and ported by map performance
3. GSC S3 billet cams 280
4. gt3776 turbo it's twin but going to make it single scroll
5. Full race single scroll manifold
6. 1100cc FIC high z injectors
7. ssqv 4 bov
8. bosch 400 lph fuel pump but thinking to put 2 fuel pumps
9. HKS cam gear pulley
10. Kakimoto Regu 06&R exhaust system
11. Downpipe 3 inch
12. Aem meth kit with failsafe
13. Hallman boost controller
14. Brembo slotted rotors
15. Stock throttle body
16. stock intake manifold
17. Stock block
18. Tial 44mm External wastegate
Please read the following things and telll me if you think my setup is miss matched or unreliable and how many hps would i be making. will get it tuned around 2.0 bar boost
#3
Newbie
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
BluesunsXIV
Evo X General
2
Aug 30, 2009 04:14 PM
Bunni34
The Loft / EvoM Car Talk Corner
94
Mar 16, 2009 01:00 PM
BlackonBlack2
EvoM New Member / FAQs / EvoM Rules
48
Mar 28, 2007 01:10 PM