Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

TurboTrix Flash vs. Dynoflaah

Thread Tools
 
Search this Thread
 
Old Jul 24, 2004 | 07:32 AM
  #166  
matt55's Avatar
Evolved Member
iTrader: (12)
 
Joined: May 2003
Posts: 1,734
Likes: 1
From: NC
Originally Posted by evo8power
im very happy with the car,
Thats all that matters
Now go to the strip get some good runs !!
Old Jul 24, 2004 | 07:34 AM
  #167  
Huscroft6's Avatar
Evolving Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 275
Likes: 0
From: NE CT
Originally Posted by Noize
This just reinforces the fact that I trust Al about as far as I can throw the entire city of Milford, CT.

There have been lots of cars that dyno a fair amount higher at Pruven than any other dynojet. All the baseline XEDE map Vishnu Stage 1 cars were putting down 315whp and above at Pruven. At Alamo, they put 295ish, and at Turbotrix, they were a tiny bit higher than Alamo, just above 300. Eric L's car identically modded picked up 15% at Pruven, and Evo8power's car is the only one EVER to read lower? BS!

There are so many facts stacked against Al, but people continue to believe his breeze blowing. Hopefully other searchers of the truth will see right through this BS, as there is a good amount of evidence on the table against it.

Actually I think your wrong.... Im Kevins brother and have dynoed many times on Pruvens as well as many times at Exotix Motorsports in PA, also a AWD dynojet. And yes, with the exact same mods and 94 octane, same boost. Done it twice that way. Both time Exotic's dynojet read like 10 WHP HIGHER than Pruvens, same mods, same boost, same gas, same dynojet........ Take it for what its worth....
Old Jul 24, 2004 | 07:42 AM
  #168  
robertrinaustin's Avatar
Evolved Member
iTrader: (5)
 
Joined: Dec 2003
Posts: 1,858
Likes: 0
From: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
Originally Posted by Noize
Step off, champ. How many honest runs did the Turbotrix tune get on the Pruven dyno? Dan is an honest guy, and admitted he wasn't present for this car. Apparently you can't accept that 309whp is a horrible misrepresentation of what the car really did. I'm not buying it, and neither are lots of other people.
Do you even read these posts? How can anyone misrepresent TT's work when they didn't really do much to the car? I understand you hate Al, but let's be fair. You are always quick to throw accusations, but never offer anything to back them up except to say this or that couldn't happen.

Props to TT for even helping this guy out. With his history, I wouldn't get anywhere near him.


Originally Posted by TurbotrixRacing
All i did to the guys car was dyno the car for two runs .. Got a number .. 330 whp and 280 ft lbs. I did two more pulls , dialed in his air fuels and he made 349 and 305.. 4 pulls. I didnt spend countless hrs on the car. Didnt need to... The car was undrivable and that was it. He left he shop happy... Like i said before i am in no way in competition with al. I wish good luck to kevin and hopes he makes crazy mph with that turbo. Turbotrix is what it is ... We will continue to tune and make more and more hp's with the evo. All i was trying to do was help someone out and this turns into a war.

Mark
Turbotrix
Old Jul 24, 2004 | 07:46 AM
  #169  
Huscroft6's Avatar
Evolving Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 275
Likes: 0
From: NE CT
Originally Posted by robertrinaustin
You're an idiot and have been deceived!
Only kidding. The people that are always most unhappy with Al are not his customers. He manages to do a pretty good job of keeping them happy! What does that tell you?

Exactly.... How many times/posts do you see/read that are unhappy with Al?? O very few here and there, ex my brothers last tune, but then what happens?? He gets his major prob fixed, new IC piping to help the lag, and goes back to Al which he should have waited for in the 1st place, and gets a great tune. But out of the over 400 i think tunes by Al, very very few unhappy customers... and because of all the Vishnu guys posting all there Al bashing when Al cant even post for himself on here, Ill throw out that Ive visited the Vishnu board maybe 4 times and have seen more complaints than Ive EVER seen about Al. And Al has more customers....
Old Jul 24, 2004 | 07:54 AM
  #170  
robertrinaustin's Avatar
Evolved Member
iTrader: (5)
 
Joined: Dec 2003
Posts: 1,858
Likes: 0
From: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
Originally Posted by Huscroft6
Exactly.... How many times/posts do you see/read that are unhappy with Al?? O very few here and there, ex my brothers last tune, but then what happens?? He gets his major prob fixed, new IC piping to help the lag, and goes back to Al which he should have waited for in the 1st place, and gets a great tune. But out of the over 400 i think tunes by Al, very very few unhappy customers... and because of all the Vishnu guys posting all there Al bashing when Al cant even post for himself on here, Ill throw out that Ive visited the Vishnu board maybe 4 times and have seen more complaints than Ive EVER seen about Al. And Al has more customers....
I would argue that every tuner on here gets complaints (many of them from your brother ). Vishnu does a great job of tuning cars and keeping customers happy. Unfortunately, some Vishnu customers have this blind obsession with attacking Al and it gets old. It also doesn't add any value to this forum to continually call someone names.
Old Jul 24, 2004 | 08:12 AM
  #171  
YellowFever's Avatar
Evolved Member
iTrader: (24)
 
Joined: Apr 2003
Posts: 1,511
Likes: 0
From: Clifton, NJ
Originally Posted by davidbuschur
They dyno'd it at 23 psi, Al dyno'd it with the same boost settings and made 30 more from when they did their quick tune on it.
David Buschur
www.buschurracing.com

FYI Dave,

They dynoed it at 24 psi - it says so on the dyno sheet NOT 23 psi.

Old Jul 24, 2004 | 08:31 AM
  #172  
TurbotrixRacing's Avatar
Former Sponsor
iTrader: (21)
 
Joined: Jun 2003
Posts: 2,742
Likes: 0
From: Edison
47 runs .... man that dyno must be tired. ....


Mark
Turbotrix
Old Jul 24, 2004 | 08:39 AM
  #173  
prostockCRX's Avatar
Evolving Member
 
Joined: Mar 2004
Posts: 116
Likes: 0
From: milfort ct
Originally Posted by TurbotrixRacing
47 runs .... man that dyno must be tired. ....


Mark
Turbotrix
Kevin has been on our dyno at least three times, which explains the high dyno number, that wasn't in one day... not sure i understand what you mean buy tired?
Old Jul 24, 2004 | 08:58 AM
  #174  
YellowFever's Avatar
Evolved Member
iTrader: (24)
 
Joined: Apr 2003
Posts: 1,511
Likes: 0
From: Clifton, NJ
How come dyno run 042 shows 366whp:






And here it also says dyno run 042 BUT it shows 378.1 whp?






And in Kevins signature (386 whp 335 ft lbs) - he just put that he made 386 whp .. where does it show that on the dyno sheet that he made 386whp

Last edited by YellowFever; Jul 24, 2004 at 09:04 AM.
Old Jul 24, 2004 | 09:06 AM
  #175  
TurbotrixRacing's Avatar
Former Sponsor
iTrader: (21)
 
Joined: Jun 2003
Posts: 2,742
Likes: 0
From: Edison
Torque ..???...


mark
turbotrix
Old Jul 24, 2004 | 09:12 AM
  #176  
prostockCRX's Avatar
Evolving Member
 
Joined: Mar 2004
Posts: 116
Likes: 0
From: milfort ct
Originally Posted by YellowFever
How come dyno run 042 shows 366whp:






And here it also says dyno run 042 BUT it shows 378.1 whp?

confused:

And in Kevins signature (386 whp 335 ft lbs) - he just put that he made 386 whp .. where does it show that on the dyno sheet that he made 386whp
Al used sae correction to stay consistent, as it was raining off and on and temp was up and down, anyway you should go ask al in his forum, seeing that he can't respond in this thread
Old Jul 24, 2004 | 09:12 AM
  #177  
mikesevo8's Avatar
Evolved Member
 
Joined: Sep 2003
Posts: 1,078
Likes: 61
From: Ulster County, NY
Don't you know Joel - it's more of the lies and deception J/K

Actually - one chart looks to be corrected, the other raw numbers.

I would assume 386 was his best pull (for the bragging rights), but not the last pull; the one he left with.

oops - ken beat me to it....

I do not envy you Pruven guys.
You are all going to end up posting your buns off trying to defend yourselves after this.

PS - Joel - damn dude, you been coming down hard on Al, who has been nothing but nice to the club,
and now you start down the road to insulting another tuner, Buschur (with the ).
Bro - take it easy....

Last edited by mikesevo8; Jul 24, 2004 at 09:19 AM.
Old Jul 24, 2004 | 09:20 AM
  #178  
YellowFever's Avatar
Evolved Member
iTrader: (24)
 
Joined: Apr 2003
Posts: 1,511
Likes: 0
From: Clifton, NJ
Originally Posted by prostockCRX
Kevin has been on our dyno at least three times, which explains the high dyno number, that wasn't in one day... not sure i understand what you mean buy tired?
looks to be only 12 runs. From his first run (35) and his last run (47). 47-35 = 12.

I thought they said only 4 runs
Old Jul 24, 2004 | 09:22 AM
  #179  
YellowFever's Avatar
Evolved Member
iTrader: (24)
 
Joined: Apr 2003
Posts: 1,511
Likes: 0
From: Clifton, NJ
Originally Posted by mikesevo8
Don't you know Joel - it's more of the lies and deception J/K

Actually - one chart looks to be corrected, the other raw numbers.

I would assume 386 was his best pull (for the bragging rights), but not the last pull; the one he left with.

oops - ken beat me to it....

I do not envy you Pruven guys.
You are all going to end up posting your buns off trying to defend yourselves after this.

PS - Joel - damn dude, you been coming down hard on Al, who has been nothing but nice to the club,
and now you start down the road to insulting another tuner, Buschur (with the ).
Bro - take it easy....
I don't hate no one in this world.. we are all just debating here
Old Jul 24, 2004 | 10:00 AM
  #180  
93h22cvc's Avatar
Evolving Member
 
Joined: Nov 2003
Posts: 243
Likes: 0
From: ct
Originally Posted by TurbotrixRacing
47 runs .... man that dyno must be tired. ....


Mark
Turbotrix
mark did you all of a sudden grow enormous *****. cause your comments are a little off.

Last edited by 93h22cvc; Jul 24, 2004 at 10:08 AM.



All times are GMT -7. The time now is 09:41 PM.