Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Vishnu Turboback Question Cel

Thread Tools
 
Search this Thread
 
Old Aug 15, 2004 | 07:59 PM
  #1  
concept3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2004
Posts: 18
Likes: 0
From: galloway
Unhappy Vishnu Turboback Question Cel

Hey all......Anyone who has heard about or may have the Vishnu turboback four piece exhaust for $1350 (whew!)....uhh.....does the Check Engine Light come on?
Someone also told me to make sure it has a Bung on it for the O2 sensor......uhh...does it? I can't seem to get in touch with the Vishnu guys

I can tell you anything and everything on a Turbocharged AE102, but my baby Evo's only 2 months old.....and I haven't played with her yet. HELP!
Reply
Old Aug 15, 2004 | 08:09 PM
  #2  
GT35REVO's Avatar
Account Disabled
 
Joined: Aug 2004
Posts: 44
Likes: 0
I will see what I can do to help. Did you put both o2's back in? Did you get anything on them like WD40 or anything else? Also I would clear the code and try again, I got a P0420 before with a high flow cat and once I cleared the code it never came back. To clear the code pull the Neg batt cable "Black one" and hold the brake down for 15 seconds, once you put the neg back on the cd player should eject the CD as well as the clock should be at 1:00. Try this and let us know if the code comes back.



Originally Posted by concept3
Hey all......Anyone who has heard about or may have the Vishnu turboback four piece exhaust for $1350 (whew!)....uhh.....does the Check Engine Light come on?
Someone also told me to make sure it has a Bung on it for the O2 sensor......uhh...does it? I can't seem to get in touch with the Vishnu guys

I can tell you anything and everything on a Turbocharged AE102, but my baby Evo's only 2 months old.....and I haven't played with her yet. HELP!
Reply
Old Aug 15, 2004 | 08:34 PM
  #3  
concept3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2004
Posts: 18
Likes: 0
From: galloway
Oh sorry I forgot, but thanks for the reply.....sorry because I plan on purchasing the vishnu turboback and I was trying to get more info if anyone has had any problems with this setup before I dish out *gulp* $1350..... I plan on getting the whole shabang....turboback, IC pipes, HKS racing suction and SSQV, so I wanna do it once and right. Thanks for replying GT35REVO, but I'll remember the battery thing if it happens....will keep you posted
Reply
Old Aug 16, 2004 | 08:11 AM
  #4  
concept3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2004
Posts: 18
Likes: 0
From: galloway
anybody got anymore info for me?
Reply
Old Aug 16, 2004 | 09:29 AM
  #5  
Nellie's Avatar
Newbie
 
Joined: Feb 2004
Posts: 69
Likes: 0
From: St. Helena, CA
I would try throwing this question onto Vishnu's board - https://www.evolutionm.net/forums/vishnu-performance-california-85/
Reply
Old Aug 16, 2004 | 09:52 AM
  #6  
freedom's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jun 2003
Posts: 755
Likes: 0
I have the dumpback which is the same except for the turboback / dumpback end of the dump pipe.

No CEL light to date - knock on wood.

There is a bung for the rear O2 sensor right behind the cat. While the bung is somewhat further forward with respect to the stock system, the wire for the O2 sensor reaches without a problem.

Last edited by freedom; Aug 16, 2004 at 10:01 AM.
Reply
Old Aug 16, 2004 | 10:33 AM
  #7  
concept3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2004
Posts: 18
Likes: 0
From: galloway
sweetness....thanks, anyone else with a review?
Reply
Old Aug 16, 2004 | 05:42 PM
  #8  
erioshi's Avatar
Evolved Member
 
Joined: Mar 2003
Posts: 1,114
Likes: 0
Over a year without a CEL running the that exhaust and the high flow cat. There is a work-around for people who like to run a test pipe - I've been using it for my track days successfully.
Reply
Old Aug 16, 2004 | 05:47 PM
  #9  
David@Vishnu's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jul 2004
Posts: 1,180
Likes: 0
I have a Vishnu Regular Dumpback and Love it too! j/k concept let me know If you have any more Qs these guys seem to be doing a good job
Reply




All times are GMT -7. The time now is 09:36 AM.