3'' RnR HKS Carbon/TI Turbo back
ok the last pic is a pic of the angle it sits. i hope this helps you guys. the lowest part of the 3' inch pipe site MABY 9 INCHES above the ground. there is a good space there. a lowerd car should have no problem with this exhaust. unless you install it rong.
Evolving Member
Joined: May 2006
Posts: 110
Likes: 0
From: Centennial, CO
Originally Posted by evodan2004
ok the last pic is a pic of the angle it sits. i hope this helps you guys. the lowest part of the 3' inch pipe site MABY 9 INCHES above the ground. there is a good space there. a lowerd car should have no problem with this exhaust. unless you install it rong.
.
Newbie
Joined: Jul 2006
Posts: 58
Likes: 0
From: Byron, IL
What happend to RNR racing website. Are you working on getting it back up? i feel much better ordering from a company that has a website, and i can see your other products, and pictures, and prices. Thanks
I have the RNR "full 3inch" C/Ti, and it rattles on my Hatchkis sway bar like CRAZY. It hangs low, like someone already pointed out, but I'm lowered and don't scrape at all...
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
Newbie
Joined: Jul 2006
Posts: 58
Likes: 0
From: Byron, IL
Originally Posted by I'mStock
I have the RNR "full 3inch" C/Ti, and it rattles on my Hatchkis sway bar like CRAZY. It hangs low, like someone already pointed out, but I'm lowered and don't scrape at all...
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
Originally Posted by I'mStock
I have the RNR "full 3inch" C/Ti, and it rattles on my Hatchkis sway bar like CRAZY. It hangs low, like someone already pointed out, but I'm lowered and don't scrape at all...
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
Plus, even though Ryan promised me the 3" HKS canister, mine is 2.5" ID.
You get what you pay for, I love the sound, but hate that I had to wrap my sway bar and a portion of the exhast with heat wrap as to stop the rattle. The 2.5" part sucks too, especially since I went out of my way to ask about it being the 3" cannister, which Ryan aaaured me it would be.
A section of the muffler tapers down to about 2.75 in diameter. The rest of the catback and dp are a full 3". I agree that it was advertised as a full 3" which it isnt.
All, I repeat all RnR turbo backs are a complete true 3" system. The ONLY Muffler that has a slight taper is the HKS. This is not an RnR product and is the only muffler we use that has a taper. This is the only muffler that we sell that has a taper. It has never been advertised to be true 3" as it is impossible to do.
GUYS LOOK AT MY PICS if your exaust is lower then that you installed it rong. just cause it is in and not leaking dose not meen it is in right. mine is at least 9 inches off the ground from its lowest point. my drivway is fuged up do it may look lower. they fit you just got to ajust it.
this system IS 3 INCH TILL TILL it reaches the hks muffler. that is the ONLY part that is NOT 3 inch. do i need to take more pic's???????????????????? lol
this system IS 3 INCH TILL TILL it reaches the hks muffler. that is the ONLY part that is NOT 3 inch. do i need to take more pic's???????????????????? lol
i have posted plenty of pic's so there should be no problems any more. it fits, it is 3 inch, what more you want???? it id perfect. so is my friends evo. i got my system and he wanted it. so i had him call rnr and once again a perfect hks/rnr exaust. he loves it.
Originally Posted by I'mStock
No, but more question marks couldn't hurt. 
?????????????????????????????????????????????????? ????????????????? and for the rest of you guys relax. it fits