That will never happen

 

What does a typical mitsu rally car put down to the wheels.




______________________________

Cometic headgasket for sale
Evo 9 suspension for sale
Precision 1000cc injectors for sale

 

I think that those are carbon fiber seats in the interior pics. If you do those, then you'll get my approval.

 

Look at other rally cars and get ideas from there...

 

What you need is the rear spoiler, Enkei Evo Tarmacs and a little splash of mud.

Heres my car after a day out at the Rally of NZ:




Group N around 250hpish at the engine.

WRC probably somewhere around the 300-330hp range at the engine.

 

Where do you get the rear spoiler from?

 

you could do this

http://cgi.ebay.com/ebaymotors/MITSU...QQcmdZViewItem

 

Here's the rally look I'm sporting:

 

cool look nubby.. i didn't know they had rallycross down in omaha..

To go back to the original question, I thought the '06 WRC was not exactly based on the Lancer platform, but actually the longer wheelbase Cedia platform (for stability).

However, the front end is cosmetically most similar to the VII front (as pointed out by someone).

Here's my suggestion to copy the WRC exterior (assuming you have a red car):

1) EVO VII front bumper in red
2) EVO VII hood in red
3) Paint lower valance of EVO VII front bumper white
4) Paint side skirts white
5) EVO VII wing in red
6) Heavier mesh in black to cover the I/C opening (I/C is not located in stock location in WRC car and therefore doesn't show).
7) Door handles in black (unless you have an RS)
8) Ditch the side view mirrors (perhaps not practical on street)
9) Paint lower rear valance of rear bumper white
10) Paint twin hood mesh vents over in red.
11) Get EvoDave to match the color scheme for the headlights.

BONUS POINTS

12) Install roof vent (sure to attract cops and other assorted rice as well as make you a hit with your body shop guy)
13) Install functional hood pins

 

Sorry forgot to mention a very obvious thing (so obvious perhaps I missed it) - buy the Enkei Tarmacs in white.. Those look to be 18s on the WRC car, but I could be wrong. Additional BONUS POINT for spraying "MICHELIN" in white on the sidewalls

 

I have some compomotive MO rally wheels for sale. they look awesome on the street too. they look like this:

 

the OZ rally wheels are 4 lug, EVO is 5 lug.

 

damn now how did u get an Evo5 in the US

 

You could get the Enkei RC-T4 wheels which are tarmac rally wheels and they're reasonably priced. Or you can go with Compomotive or Speedline Corse which will set you back more.

If you really want to look the part you can get Michelin tarmac rally tires here:
http://www.subesports.com/products/?...Michelin+Rally

If you have lots of money, you can get real Ralliart competition parts here:
http://www.ralliart.it/sp_parts.html

Or carbon interior parts like door cards and the like:
http://www.tatomotorsports.com/interiore7.asp

 

Where can you get rally rims at/