busted water sprayer nozzle
busted water sprayer nozzle
i recently hit an aluminum post on the highway to avoid an accident because a truck lost some stuff off the back but anyhow i bent my intercooler watersprayer nozzle (one of the two on the front bumper) and now my wastegate (i think) lets all the boost off around 4000 to 5500 RPM's when i drive my evo hard causing it to be much slower than it should. is this my ecu telling my wastegate not to let it boost too high to aviod excess heat damage? thanks
Sheesh, you K-Zoo guys are all the same... hittin **** and not even gettin it looked at... 
Just kidding, any local shops out there yet? I know the ZooFactory is gone, but has anyother shop emerged?
Get that **** looked at. I damn sure the ECU isn't limiting you based on a busted washer sprayer...
Anyhow, any of you K-Zoo folk interested in comming out to the East Side for a Dyno Day at Payn Tech??? I know 3-4 Evos already interested......AWD Mustang Dyno + AWD EVO =
Shhot me an Email...

Just kidding, any local shops out there yet? I know the ZooFactory is gone, but has anyother shop emerged?
Get that **** looked at. I damn sure the ECU isn't limiting you based on a busted washer sprayer...
Anyhow, any of you K-Zoo folk interested in comming out to the East Side for a Dyno Day at Payn Tech??? I know 3-4 Evos already interested......AWD Mustang Dyno + AWD EVO =
Shhot me an Email...
Last edited by MattGold; Oct 1, 2012 at 08:23 PM.
yea i had it looked at by Fox
in Grand Rapids cuz Harold Ziegler
in Kazoo sucks. I have to drive an hour there and back and Fox
seems to have troubles communicating with me about my evos problems sometimes.
in Grand Rapids cuz Harold Ziegler
in Kazoo sucks. I have to drive an hour there and back and Fox
seems to have troubles communicating with me about my evos problems sometimes.
Evolved Member
iTrader: (2)
Joined: Oct 2002
Posts: 2,367
Likes: 0
From: Between the Blue and the Sand
I agree with Shape GSX.... At the very least, the accident broke more than just the IC sprayer...
Have you checked the IC tubing to make sure nne of the plumbing was affected by you little incident?
SC
Have you checked the IC tubing to make sure nne of the plumbing was affected by you little incident?
SC
Trending Topics
no but i did bend my ic and crack it alittle bit, but my car was doing the same thing before the accident so i took it in and they said that my ic water resevoir was unplugged and that there was no water spraying out of the ic sprayer which leaves me to believe that the busted nozzle not spraying could be causing the problem and the crack in the ic could just equal a lost of boost becasue my gauge only reaches a peak boost of 16 psi
Thread
Thread Starter
Forum
Replies
Last Post
Kazoo's1st Evo8
Evo Tires / Wheels / Brakes / Suspension
21
Jul 4, 2003 09:53 PM




