i just bought my evo not too long ago and was planning to do the housing for my headlights and take out that ugly orange piece inside. but i reallized you need to take off the front bumper to get out the headlight. just wanted to know how hard it was to take off the front bumper and if its a pain in the *** to put it back on.

 

There is a how to in the , you guessed it - How To Section of the forum. Look in there you will find it. It's a little trickey the first time you do it but if you know what your doing you can have it off in just a couple min.

 

search the "how to" section

 

it's held on by 4 bolts. 1 on each side by the fron of the tires and the other 2 is on the top of it under the hood. If you have your brush guard on underneath the car then that has to come off also. That is held on by like 8 bolts or so. But mine was never there so I don't know about takig it off. It's pretty easy.

 

its really easy. it takes less than 5 min if u know what bolts to take out. But putting back is kinda hard to me. Took me several times to get it fit right.
make sure to take out 2 bolts near intercoolers and pull down on the bumper

 

It's pretty easy man.