so i have 1gen DV on my evo 8 with buschur pipings right now.
it looks like this

http://i719.photobucket.com/albums/w...302_141052.jpg

and i want to put this on there

http://www.streettunedmotorsports.co...al_q_r_bov.htm

first of all.
does it fit?

if not whats the easiest way to make it fit other than the obvious weld option?

would this adapter work?
http://www.lancershop.com/customer/p...&cat=26&page=1

would it stick out too far to a point where it might hit the hood?

let me know

 

obvious weld option takes the cake

that adapter will not work

 

 

it'll never work, just buy a tial flange for like 10-20 bucks, and bring it to a local shop that does tig welding. have them cut off the old flange and weld the new one on..
i just did this a few weeks ago with my brothers Sti. he needed his old hks bov flange cut off and welded a new tial flange on, brought it to a local corvette shop down the road, guy only charged 30 bucks..

plus, do you really want all different connections and more places for it to leak, etc..?

 

do it right brO, cut the old flange off, weld new tial and wualla perfect no issues what so ever. gl

 

I do have an extra tial flange if you need it. I never used it because ets made me a short route pipe with the flange on it.

 

+1 on welding on a tial flange.

 

+1

 

+2

 

Like everyone said, you're gonna need a TiAL flanged.

 

+3 the greddy flange is more lemon shaped. Buy a tial flange have it welded shouldn be more than 50 bucks

 

ok got it. i guess i dont have any other oprions.
thansk for the reply guys

 

just went thru the same process, welding a new stainless flange is the only way to go