I was looking into getting the Spoolinup COP. My mods are Cobb sf intake, cosworth m2 cams, invidia g200 turbo back, walbro 255, Hallman boost controller.

I have not yet installed the exhaust or boost controller. I plan on making an appointment to go get tuned at Moon Performance. And im holding off putting the parts on until right before i drive out.

Now my question is should i upgrade injectors? And I was also looking at the spoolinup COP. Would it be a good idea to upgrade to this and say 750-1000cc injectors?

 

The stock coils should be more then enough to handle the upgrades that you have mentioned, will a spoolin-up cop hurt your mods listed? Certainly not all, could your money be spent in a more productive area? Yes, try an after market lower intercooler piping, bigger intercooler, Bushur plus other companies offer good porting/polishing and coating services for your stock exhaust mani, intake mani and a 65mm throttle body to just name a few other places you may want to look into before the purchase of the cop. Sparktech recommends a cheaper non cdi cop if you don't ever plan on reaching past or close to 700hp which I believe are rated to around 500 plus horse power. Good luck with the build.