Evo wont start with AEM EMS and has dead cyl number 2
Evo wont start with AEM EMS and has dead cyl number 2
When the car gets the OEM ECU put back on it fires right back up however it has a dead cyl number 2.
Engine was taken apart everything checked out fine we put a new head gasket on it.
Took the head to a machine shop and everything was fine.
It wont even start with AEM EMS.
What could be wrong?
We checked the resister, injector signal, spark.......
Engine was taken apart everything checked out fine we put a new head gasket on it.
Took the head to a machine shop and everything was fine.
It wont even start with AEM EMS.
What could be wrong?
We checked the resister, injector signal, spark.......
Last edited by JDM EVO PANAMA; Aug 2, 2011 at 10:26 AM.
I would post that question under the AEM EMS section.
https://www.evolutionm.net/forums/aem-ems-99/
Good luck
https://www.evolutionm.net/forums/aem-ems-99/
Good luck
