HKS 272 and JIC sound
Thread Starter
Evolved Member
iTrader: (9)
Joined: Feb 2003
Posts: 1,520
Likes: 0
From: Alexandria, VA
HKS 272 and JIC sound
OK spite all the controversy and here say, i put in 272/272, i figured that the idle would suck terribly bad and i would have to add some fuel at idle...
but, nothing....they work great, and have no problems at all
anyway
http://forums.dcevoclub.com/showthread.php?t=587
Here is a video of that lets you hear the so called "irratic idle".
http://www.dcevoclub.com/jichksmdres.wmv
Power is great, driveability is great, now i just need to tune these bad boys
but, nothing....they work great, and have no problems at all
anyway
http://forums.dcevoclub.com/showthread.php?t=587
Here is a video of that lets you hear the so called "irratic idle".
http://www.dcevoclub.com/jichksmdres.wmv
Power is great, driveability is great, now i just need to tune these bad boys
Last edited by nastea; Jan 18, 2004 at 04:09 PM.
Thread Starter
Evolved Member
iTrader: (9)
Joined: Feb 2003
Posts: 1,520
Likes: 0
From: Alexandria, VA
my idle is fine... ~900 rpms some times 1000 rpms, i did notice that my vac pressure went down at idle, but when in gear and such its how it was before the cams, boost is fine, power has increased.
I actually chirped the tires from 1st, and then from second to third...
I actually chirped the tires from 1st, and then from second to third...
My vac when warm is about -11-12ish and you can see it move when you hear the cam hit. Off idle the power just flat out kicks ***. Also don't bump the idle up too much because you can get a CEL from that as well.
damn OBD2 crap
damn OBD2 crap
Originally posted by nastea
my idle is fine... ~900 rpms some times 1000 rpms, i did notice that my vac pressure went down at idle, but when in gear and such its how it was before the cams, boost is fine, power has increased.
I actually chirped the tires from 1st, and then from second to third...
my idle is fine... ~900 rpms some times 1000 rpms, i did notice that my vac pressure went down at idle, but when in gear and such its how it was before the cams, boost is fine, power has increased.
I actually chirped the tires from 1st, and then from second to third...
There has been a shortage of HKS 264/272 cams. Does anyone out there know if they are becoming more available? I'm about ready to take the cammy plunge. Sorry, I know I'm a little off topic, but not too bad....
Trending Topics
IIRC, Buschur had a bunch of 272's he was unloading around the holidays, don't know if he still has them.
FWIW, I love my 272's, the idle is a little rough, but the top end pulls like a prom date giving her first handjob.
FWIW, I love my 272's, the idle is a little rough, but the top end pulls like a prom date giving her first handjob.
Originally posted by 4G63>OOOO
IIRC, Buschur had a bunch of 272's he was unloading around the holidays, don't know if he still has them.
FWIW, I love my 272's, the idle is a little rough, but the top end pulls like a prom date giving her first handjob.
IIRC, Buschur had a bunch of 272's he was unloading around the holidays, don't know if he still has them.
FWIW, I love my 272's, the idle is a little rough, but the top end pulls like a prom date giving her first handjob.
I did have a complete extra set, but they have been promised to a local buyer. I ordered a set from one vendor, and when they were taking a bit long to arrive, I went ahead and ordered from RevHigh Online, who had them in stock and delivered me a set within a few days. They might be worth a try:
http://www.revhighonline.com/page.ph...00000000007973
http://www.revhighonline.com/page.ph...00000000007977
http://www.revhighonline.com/page.ph...00000000007973
http://www.revhighonline.com/page.ph...00000000007977
Thread
Thread Starter
Forum
Replies
Last Post



