i have an evo 8 and my lower clutch line broke......lost complete pressure on the clutch pedal!!!!i replace the line, i do not see any leak at all but the pedal would not build any pressure. Any ideas on what to do now????

 

You need to bleed the line from the slave cylinder

 

PM sent!

 

Use your hand to move the pedal and bleed the line once you can build some pressure. Go slowly. It is a little different then the brakes.

 

i tried and tried for like 20 mins straigh to bleed it and it would not work!!!!!

 

When it happened where you shifting hard when the line broke? Did you check to make sure your TOB is still on the clutch?

 

no shiftin hard at al.it happened like at 15 mph....