Repairing Bumper Rust on Evo, have a couple questions..
Apr 4, 2004, 10:48 PM
#1
Evolving Member
Thread Starter
Join Date: Oct 2003
Location: Chatsworth, CA
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Repairing Bumper Rust on Evo, have a couple questions..
If you guys are new to the Evo's rust issues.. check out the thread: https://www.evolutionm.net/forums/sh...d&pagenumber=1
Anyways.. I've taken out the tail lights and the plastic screw, 10mm bolt under them, I've taken out the ones behind the tires, and the two 10mm bolts that hold the latch that the trunk closes with. I know I have to remove the plastic peice on the inside of the rear of the trunk, but was wondering how I would do it without breaking the plastic clips that hold it in place (is it possible?).
Anyways.. I've taken out the tail lights and the plastic screw, 10mm bolt under them, I've taken out the ones behind the tires, and the two 10mm bolts that hold the latch that the trunk closes with. I know I have to remove the plastic peice on the inside of the rear of the trunk, but was wondering how I would do it without breaking the plastic clips that hold it in place (is it possible?).
.i haven't see one in awhile.this should be fun.
