yeah when cal told me of these a few weeks ago i was about ot cry, then i looked at my bank account and said " can't do it "... but i will be doing this in the spring, thanks for the great write up bro....

 

Great write up. Can you let me know where to get the battery and where on here can I find a tray for it? Thanks

 

search its not 2 hard try mini bat try mini battery tray u should find plenty of info

 

I found the battery, but still in search for a good tray for when this needs to be done. Most of the searches I did came up with old info.

 

https://www.evolutionm.net/forums/sh...i+battery+tray

 

I already posted up in that one

 

just installed the lower pipe (have buschur upper) and used this write up to help get past the starter (the bolt was easy to take off with the starter on but impossible to get back on with it on)

did anyone have a problem with their clamps?

i cant even fit my clamps around the hose on its own (let alone when the hose is on the pipe) the clamps seem to be smaller by like a milimeter or so compared to the coppler.
did i just get bad clamps? i had to use some regular pipe clamps from home depot to get the job done.

 

yeah gary said they accidentally messed up with the t-bolts and sent out a size 2 small he said to e-mail him with how many u needed and he would send them out all mine fit but the top 2 and the manifold one but i dont think it comes with a manifold one......... yeah getting that bolt isnt 2 bad with the starter but putting it in is hell it can b done im sure but all you have to do is take out 2 easy bolts and move the starter. That is well worth the extra 3 min to not take the risk of cross threading the turbo u know

 

thanks for the info, ill email them and get the right clamps

 

This is a very nice how-to, i'm def going to use when I install my IC piping. Although $370 is kinda expensive, maybe i'll try to find somthing a bit cheaper.

 

thier isnt much cheaper i think thier is one cheaper on lancershop.com but the rubber fitting and fitment itself it far far worse then this kit.. i know becuase i have installed one. And i also think that kit is only about 80$ cheaper if that.

the helix kit also comes in black and blue tubing which i thought was pretty cool

 

^^ Yeah, I went around looking at kits today and this will be the one I purchase, where'd you get yours from and how much? Lancershop.com offers it but is out of stock. Would there be any chance to get red tubbing or only the black and blue? Then i've gotta decide what to do about my mini-battery dilema, I wanna check out your how-to when you make it.

 

https://www.evolutionm.net/forums/sh...ght=evoisdream

i got them straight through gruppe-s free shipping ! give them a try best customer service and shop i have ever encounterd

 

Thank you all for the support and interests of our products!!!

This is a very well written and documented write-up!! Thank you EVOISDREAM!

 

I just used this thread to install my Upper HELIX IC pipe and it totally helped me out. I hope this thread makes it to the How-To Section.
BTY: Gruppe-s any word on the Black Lower IC piping.....I only have the upper kit now....Just let me know and thanks for the fast responses in the past!