Notices
Evo How To Requests / Questions / Tips If you're looking for a how-to on something, ask in here.

Question about Greddy Type S

Thread Tools
 
Search this Thread
 
Old Oct 28, 2003 | 06:09 PM
  #1  
EvoBoy03's Avatar
Thread Starter
Newbie
 
Joined: Aug 2003
Posts: 72
Likes: 0
From: Winter Springs, Fl
Question Question about Greddy Type S

I am just put on my Greddy type s blow off valve tonight and I tried putting it on before but I had problems with my idle and the car shutting off on me with it on. Tonight it seems ok so far but the blow off valve sounds kinda like a vooosh with a whistle at the end at full boost but at low boost it kinda flutters. I am not sure if this is good or bad. The screw is about a quarter of the way out from the top, should I just have the screw mostly out all the way. Any advice would be greatly appreciated also any pics of your type s on your evo would be great.

Thanks
Michael
Reply
Old Oct 29, 2003 | 05:18 AM
  #2  
8th_Sin's Avatar
Newbie
 
Joined: Oct 2003
Posts: 49
Likes: 0
From: Havelock, NC
The low or partial boost fluuter is normal for the greddy. The optimal setting is usually showing about 5 threads above the nut.
Reply
Old Oct 31, 2003 | 02:54 PM
  #3  
Tuner23's Avatar
Newbie
iTrader: (2)
 
Joined: Oct 2003
Posts: 62
Likes: 0
From: NM
open up the valve and take out the smaller spring, it will blow off at low boost pressures without the stutter. and also hold upon peak boost levels.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jpturbotalon
For Sale/WTB - Engine / Drivetrain / Power
11
May 15, 2016 09:48 AM
PatricksEvilEvo
Evo Engine / Turbo / Drivetrain
4
Feb 10, 2013 10:48 AM
SILVER SURFER
Evo Engine / Turbo / Drivetrain
241
May 5, 2011 07:25 PM
Ph3n1x
Evo Engine / Turbo / Drivetrain
4
Sep 1, 2005 04:34 PM




All times are GMT -7. The time now is 10:55 AM.