Hey guys,

I got the evo wiring harness for the Greddy TT but i need to know where to hook up the purple and brown wires. According to the manual, one goes to the ECU speed sensor signal wire and the other goes to an e-brake wire. If anyone has a quick diagram or picture on where those two wires should splice, that would be greatly appreciated.

Thanks!

 

Anyone? I'm sure someone has installed a Greddy TT on an Evo before lol

 

http://www.evomoto.com/tech_info.php...3_5&tech_id=24

there you go bro

 

Thanks, it was perfect!

 

Those instructions are for the Evo 8, but only one thing needs to be changed for the 9: SPEED wire from turbo timer splices into black/yellow wire on the GREEN ECU harness. Other than that, the rest is the same.