I have searched and tried all of the methods listed on this forum and not had any luck adjusting my headlights. Is there anyone who knows how and has pics that would be willing to post and inlighten me. I know this seems like a stupid question but I have tried every listed way and not had any luck. Thanks guys.
Keith

 

Although I don't have any pictures available, I also had a hard time adjusting my headlights. I was finally able to adjust the low beams by removing the screw that held the adjuster to the main adjuster where the screwdriver goes in and turning it by hand. I recommend pulling your car square to a flat wall and turning on the headlights and making a mark where the HID "cutoff" line is. Use this as your starting point. I put my car about 25' feet away from the wall and made marks for both sides. Then I just started fighting with the adjusting wheel until it was where I want it. I have mine adjusted to the number "2" is normal driving and I don't get flashed. "0" is way to high when I first adjusted it but since the roads are for crap here they seem to be "bumping down" over time. Hope this helps. Feel free to PM me if you have any questions.

Josh

 

i would like to know too.