|
EVO Long rod 2.0, nothing but RESULTS!!
After a little while of crunching numbers and tossing around options, we have a great alternative to the infamous 2.1 liter. If you want fast revs like a 2 stroke dirtbike, high rev capabilities like a rotary, and ease of installation as if it was just a 2.0...then this my friends is your ticket to ride.
Basically we use a 156mm long I beam rod, and a 2.3 stroker piston. The combination of the long rod and short piston make for GREAT high revving and fast revving capabilities. It is also very reliable and outstanding for longevity in high RPM/Horsepower cars. Take a look at this dyno graph. It was on my customer John Forsthoffer (formerly of Speed Corps) EVO 8. It was at 26psi on PUMP gas with an HTA3582 and ECU flash tuning. Check out the TQ and HP curves....to say the least, we were very happy with the results. http://img.photobucket.com/albums/v8...o20longrod.jpg -Manley 156mm Long I beam rods -Manley STD bore stroker pistons -ACL Race bearings We can build you this monster of your own for $4,640.00 Shipped. This is with a BRAND NEW block and crank from Mitsu so no core is due. If you want to send in your core afterwards we will give you up to $600 back for a good block/crank. If you have any questions feel free to PM me or email me at jws@slowboyracing.com Joe jws@slowboyracing.com 321.304.4903 x 105 |
|
how much for just the rods, pistons, rings, and bearings??? I already have a good block and crank-
|
waiting for reply-
|
Originally Posted by Matthew333
(Post 7446198)
waiting for reply-
Sorry buddy. PM sent! Joe SBR |
pm's replied!!!
|
couple more pm's sent:)
|
stock crank? stock bore?
can this be done as a drop in affair? |
It does utilize a stock crank. We can do it as a drop in, too!
-Marti |
can you pm me a kit price for all related drop in parts
Originally Posted by SBR INC
(Post 7568686)
It does utilize a stock crank. We can do it as a drop in, too!
-Marti |
Originally Posted by 555R
(Post 7569006)
can you pm me a kit price for all related drop in parts
I think we spoke on the phone today, we should have you all set up and heading in the right direction!!! Joe SBR |
Originally Posted by SBR INC
(Post 7569640)
I think we spoke on the phone today, we should have you all set up and heading in the right direction!!!
Joe SBR |
nope wasnt me
Originally Posted by SBR INC
(Post 7569640)
I think we spoke on the phone today, we should have you all set up and heading in the right direction!!!
Joe SBR |
| All times are GMT -7. The time now is 04:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands