LED Interior Lighting For Your Evo
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA
LED Interior Lighting For Your Evo
These are Japanese-made LED interior lights to replace the stock incandescent bulbs. They're not nearly as cheap as the ebay junk, but WAY nicer. Each one is custom-designed for the application. Really, really well thought-out parts. (I was sort of surprised. I mean, it's just a dome lamp, right?) For example, the Evo dome lamp housing is a bit curved, but the LED panel has to be flat. So it comes with a sort of flat precision-cut gasket that holds the LED panel to the housing with 3M adhesive. Very clever.
Here's the before and after pic of my Legacy GT:

Both pics were taken with the exact same exposure settings. (Sorry it's not the Evo...that car is under repair right now.)

For the Evo, there's a center dome light and a three-panel front map light set (pictured above). Find 'em both here:
LED interior lighting -- click me!
--Dan
Mach V
MachEVO.com
Here's the before and after pic of my Legacy GT:

Both pics were taken with the exact same exposure settings. (Sorry it's not the Evo...that car is under repair right now.)

For the Evo, there's a center dome light and a three-panel front map light set (pictured above). Find 'em both here:
LED interior lighting -- click me!
--Dan
Mach V
MachEVO.com
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA
Someone asked me if these will cause problems with the electrical systems, like LED turn signals can. The answer is no; these work just like a bulb, and your turn signals (and the rest of your electrical system) will work fine.
--Dan
Mach V
MachEVO.com
--Dan
Mach V
MachEVO.com
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA
It's easy. There's no cutting or splicing. See how the unit pictured has a little dome-light-bulb-shaped thing with wires attached? You just put that in the bulb socket, then put the LED panels in place. It's simple.
--Dan
Mach V
MachEVO.com
--Dan
Mach V
MachEVO.com
Trending Topics
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA
-Thanks for the reply!
Thread Starter
Evolving Member
iTrader: (19)
Joined: May 2003
Posts: 374
Likes: 0
From: Sterling, VA



