AMS TBE with test pipe vid
Originally Posted by methkilab
thanks a million for posting all those clips ....great help...also where do you get those spacers to clear the bottom bars?
They're just regular washers. Use stainless ones though so they don't rust.
I paid what was advertised for on AMSs site for the TBE. It really is a piece of work to hear in person. Thanks guys.
I have the AMS TBE w/ testpipe as well.
It can get pretty loud at WOT and in confined spaces
BTW, Vibrant makes the muffler section of the exhuast; well that's what AMS told me and what's stamped on the tip.
It can get pretty loud at WOT and in confined spaces
BTW, Vibrant makes the muffler section of the exhuast; well that's what AMS told me and what's stamped on the tip.
Originally Posted by revvin9k
After all these damn crazy threads of peoples Evos getting vandalized, the hollow points should deter any vandals. 
. No need to invite unwelcome attention.
Thanks for the clips. Makes me want to trade my exhaust 
--
(I didn't want to start a whole new thread, but what exhaust is this: http://videos.streetfire.net/search/...CD0C99D10E.htm)
Sorry!
--
(I didn't want to start a whole new thread, but what exhaust is this: http://videos.streetfire.net/search/...CD0C99D10E.htm)
Sorry!
Revving9K,
What size bolts did you replace the stock ones with (for the front bar)? I had AMS put on a TBE for me recently. They space out the rear one and normally leave the front one off. I wanted to put my front one back on. To me it looks like I need about 15 mm of spacers. Thanks!
What size bolts did you replace the stock ones with (for the front bar)? I had AMS put on a TBE for me recently. They space out the rear one and normally leave the front one off. I wanted to put my front one back on. To me it looks like I need about 15 mm of spacers. Thanks!
Originally Posted by revvin9k
They're just regular washers. Use stainless ones though so they don't rust.
I paid what was advertised for on AMSs site for the TBE. It really is a piece of work to hear in person. Thanks guys.
I paid what was advertised for on AMSs site for the TBE. It really is a piece of work to hear in person. Thanks guys.
Originally Posted by GroundChuck
Revving9K,
What size bolts did you replace the stock ones with (for the front bar)? I had AMS put on a TBE for me recently. They space out the rear one and normally leave the front one off. I wanted to put my front one back on. To me it looks like I need about 15 mm of spacers. Thanks!
What size bolts did you replace the stock ones with (for the front bar)? I had AMS put on a TBE for me recently. They space out the rear one and normally leave the front one off. I wanted to put my front one back on. To me it looks like I need about 15 mm of spacers. Thanks!
I'll go snap some pics for you bud, be back in a minute.
AMS tbe with high flow cat
Hey guys,just wonted to share - i have AMS TBE with a high flow cat. Im very happy with it.Although it was kinda loud for me especially on highway speeds,so i got a 3" magnaflow resonator and had it welded in the middle of the int pipe. Great results,highly recomend that option for people who want quieter exhaust without performance loss.
BTW nice vids
BTW nice vids
Originally Posted by tboboy
Hey guys,just wonted to share - i have AMS TBE with a high flow cat. Im very happy with it.Although it was kinda loud for me especially on highway speeds,so i got a 3" magnaflow resonator and had it welded in the middle of the int pipe. Great results,highly recomend that option for people who want quieter exhaust without performance loss.
BTW nice vids
BTW nice vids
