SE Lip and RPF1 SBC Tastiness!!
Thread Starter
Evolved Member
iTrader: (28)
Joined: Jun 2003
Posts: 587
Likes: 0
From: York, PA 17404
Originally Posted by SPANKED
Looks good!!! Do you have a list of mods?
What exhaust manifold cover is that (looks shiny)?... and did you paint the stock exhaust manifold (it looks silver)?
What are the gold pieces on the side of the valve cover?
What exhaust manifold cover is that (looks shiny)?... and did you paint the stock exhaust manifold (it looks silver)?
What are the gold pieces on the side of the valve cover?
-Ported and Coated OEM Manifold...Same flow as tubular manis-Dyno proven
-Gold reflective tape...this has been beaten to death here lately...search and you shall find the answers.
Thanks, hope that answers your questions...
Originally Posted by Faust
It was $250.00(And that was with tax) painted any SE color. 
I will post more pics today. And Yes, I concur that it is basically the Ralliart Lip in ABS plastic with fo Naca Ducts on the side. Thanks guys.
PS...A cool thing on the back of the lip is that it clearly states it is the "Evo 9.5 Lower Lip". I thought that was pretty cool.
I will post more pics today. And Yes, I concur that it is basically the Ralliart Lip in ABS plastic with fo Naca Ducts on the side. Thanks guys.PS...A cool thing on the back of the lip is that it clearly states it is the "Evo 9.5 Lower Lip". I thought that was pretty cool.
Originally Posted by Faust
-Cusco Exhaust manifold cover
-Ported and Coated OEM Manifold...Same flow as tubular manis-Dyno proven
-Gold reflective tape...this has been beaten to death here lately...search and you shall find the answers.
Thanks, hope that answers your questions...
-Ported and Coated OEM Manifold...Same flow as tubular manis-Dyno proven
-Gold reflective tape...this has been beaten to death here lately...search and you shall find the answers.
Thanks, hope that answers your questions...
Found a couple threads on gold foil...where can I order some?
Last edited by SPANKED; Sep 30, 2006 at 11:30 PM.
Evolving Member
Joined: Oct 2004
Posts: 215
Likes: 0
From: San Mateo, CA
So I went to visit my dealer's parts department, and was able to obtain a printout of the front bumper parts diagram. Regarding the undertray having to be replaced, my parts guy was able to identify and confirm that the undertray on the Evo IX SE is the same as the one currently on the Evo VIII and Evo IX. The big difference, however, was the fact that the SE lip has a left and right side 'AIR DAM REINFORCEMENT' (62124L and 62124R) that must be riveted to the SE front lip. I'm sure this part is made of metal, like all the other reinforcement bars on the front bumper. I'm not certain how many rivets are needed, but I'm just speculating that the reason the front lip seems 'short' is because the two reinforcement pieces aren't in place. The two pieces cost me $62.00. Just wanted to give a heads up.
Thread Starter
Evolved Member
iTrader: (28)
Joined: Jun 2003
Posts: 587
Likes: 0
From: York, PA 17404
Originally Posted by MR*EVO*VIII
So I went to visit my dealer's parts department, and was able to obtain a printout of the front bumper parts diagram. Regarding the undertray having to be replaced, my parts guy was able to identify and confirm that the undertray on the Evo IX SE is the same as the one currently on the Evo VIII and Evo IX. The big difference, however, was the fact that the SE lip has a left and right side 'AIR DAM REINFORCEMENT' (62124L and 62124R) that must be riveted to the SE front lip. I'm sure this part is made of metal, like all the other reinforcement bars on the front bumper. I'm not certain how many rivets are needed, but I'm just speculating that the reason the front lip seems 'short' is because the two reinforcement pieces aren't in place. The two pieces cost me $62.00. Just wanted to give a heads up.
You SIR, Are awesome! Thanks BRO!!! I know that they are made out of plastic. The Driver's Side is black plastic and the Passenger Side is painted like the current lower reinforcement we have now. Thanks again.
Last edited by Faust; Oct 2, 2006 at 03:57 PM.
So can someone get a list of all the part numbers they will need to order this from their local dealer, ie. lip, brakets, bolts ect... Thanks for the guys who are doing this and can supply us with the proper numbers becuase you know for the most part the parts guys are a$$holes and don't like when you don't have a part number or VIN number god forbid you ask them to try and help you figure something out 
Thanks,
Joe
Thanks,
Joe
Thread Starter
Evolved Member
iTrader: (28)
Joined: Jun 2003
Posts: 587
Likes: 0
From: York, PA 17404
Originally Posted by t51quicksilver
So can someone get a list of all the part numbers they will need to order this from their local dealer, ie. lip, brakets, bolts ect... Thanks for the guys who are doing this and can supply us with the proper numbers becuase you know for the most part the parts guys are a$$holes and don't like when you don't have a part number or VIN number god forbid you ask them to try and help you figure something out
Thanks,
Joe
Thanks,
Joe
SE Lip: 6512A149XA - Graphite Gray
SE Lip Brackets - Left: 62124L and Right: 62124R
You will need a Pop Rivet Gun and some pop rivets
Undertray is the Same
I know this is going to sound stupid but what size pop rivets should I get. I ask so many questions because I don't want to start then have to run out and be stranded. So I'm trying to have all the pieces of the puzzle together before I even start the project.
Thanks,
Jeo
Thanks,
Jeo