OVerall project pictures.. rear diffuser, forgelines, etc...
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
here is the car today, going to the paintshop tomorrow!!
u can see the oil cooler ( i need to make the ducting out of aluminum).
i had it strapped to the dyno with a blower pointed inthe left opening... with cardboard to help decide on the ducting shape, the full force of air would go through the core and out the side of the bumper just like we designed it too... should make a significant difference.
----------
we are going to run the rnr for now... and possibly full race T4 twinscroll later on.. I have no issue with the mani, its the o2 housing, i may do something about that in the meantime.
---------- cb
u can see the oil cooler ( i need to make the ducting out of aluminum).
i had it strapped to the dyno with a blower pointed inthe left opening... with cardboard to help decide on the ducting shape, the full force of air would go through the core and out the side of the bumper just like we designed it too... should make a significant difference.
----------
we are going to run the rnr for now... and possibly full race T4 twinscroll later on.. I have no issue with the mani, its the o2 housing, i may do something about that in the meantime.
---------- cb
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
well, i hadnt considered making a kit, i geuss i could.
i may try a setrab core back to back with mocal, but ive always liked mocal.
i could do some nice aluminum brackets, the ones on there now, i just bent and bolted up, to get it on the car, the stock oil cooler guide would fit with some trimming
cb
i may try a setrab core back to back with mocal, but ive always liked mocal.
i could do some nice aluminum brackets, the ones on there now, i just bent and bolted up, to get it on the car, the stock oil cooler guide would fit with some trimming
cb
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
well,
sorry guys...
been SUPER busy...
car went to the body shop this past monday, they had to fix some dents and dings from when some dude showered the car with rocks at a car show last summer, before they could start the main work...
she is looking like this right now,
the blue tape is so that we could lay out the lines, it will then get masked...
color is basically a light GG color being layed over the oem silver. I normally dont do things like this, but I wanted to give the car her own personality.
spy shots..
going to look something like this... but without the lines..
.................
once she is back on monday, i am going to put another 200 miles on her, change the oil to non break in oil... and start cranking the boost....
we have some custom GSC cams coming that will go in also!!
cheers
cb
sorry guys...
been SUPER busy...
car went to the body shop this past monday, they had to fix some dents and dings from when some dude showered the car with rocks at a car show last summer, before they could start the main work...
she is looking like this right now,
the blue tape is so that we could lay out the lines, it will then get masked...
color is basically a light GG color being layed over the oem silver. I normally dont do things like this, but I wanted to give the car her own personality.
spy shots..
going to look something like this... but without the lines..
.................
once she is back on monday, i am going to put another 200 miles on her, change the oil to non break in oil... and start cranking the boost....
we have some custom GSC cams coming that will go in also!!
cheers
cb
Last edited by CBRD; Mar 23, 2007 at 08:22 AM.
