Went to have them fitted and it looks like I am going to go with a 265 or 275 tire. Couldnt get them all on today because I have to roll the rear fenders somehow. As far as suspension goes, I am running Tein S-Techs right now. They are low and the only problem we saw when test fitting, was the rear fenders. Trying to get some pics from the fitting and of course once they are on the car I will do a small shoot. Thanks for the compliments.

 

Here are some test fit pics. Taken with iPhone, BTW

This is with a 275/35 18:




This shot is with a 265/40 18 I think. The front tire is still jacked up a bit.





This is with the car not jacked up at all.

 

i run these on my ix w/ swift springs... You need to roll the rear fenders .. its must.. also im runing 5mm spacers in the front.. id advice you , to use bigger spacers than the 5mm// the 5mm looks great but both of my front bremboes calipers have gotton scratches because the rims were too close... just throwing it out there.

 

very nice!!!

 

Thanks for the info. Anyone know where I can get a 6 or 6.5mm spacer?

 

I cant wait to finally get these on for good. They look badass.

 

subydude recommends an 8mm spacer i believe. just throwing that out there. 1-1.5mm is almost nothing.

-Chris

 

nice rims but it doesnt look right on your toyo tires? maybe the wall or something?...

 

those are clean!!!

 

would luv to fit such a wide tire, just not sure about spacers, and rolling guards.

 

badass wheels.

 

mount they up bro.

 

i got 265 falkens and it rubs on the rear. Rear fender rolling required. Also during hard cornering my front tires rub on the splash gaurd. I used 8mm spacers in the front. This is only 1 inch drop on front and 0.8 inch with coilovers. I guarantee you'll be rubbing in the front with S-techs. Good luck with all the fitment issues.

 

Holy Crap! Made in the Philippines?! I'm from the Philippines! Haha.

 

these are the same wheels I would have had but they never called me back twice. I think they will look great on your silver.