View Poll Results: Best looking body-kit
C-west
259
29.07%
GIALLA
314
35.24%
Veil Side
78
8.75%
OTHER(post pic)
63
7.07%
NONE.....I dont like body-kits
177
19.87%
Voters: 891. You may not vote on this poll
Best looking Evo8 body-kit
Newbie
Joined: Jun 2003
Posts: 76
Likes: 0
From: Florida
did anyone try to read the kansai site?
http://www.kansaiss.co.jp/parts/kam3334.htm
it says something about the baffle plate of the oil cool becoming unattached when u install the kit. Also, anyone get the difference between the net 4 place and the net 5 place kits? (could net 5 place maybe mean 5 pieces?).
Heres a ****ty translation, see what u make of this:
Lancer evolution VIII (CT9A)
Front bumper
KAM033 price XXYEN 86,000 (4 nets)
KAM034 price XXYEN 88,000 (5 nets)
When one is dissatisfied with the stock bumper, there is a new bumper for lancer evolution 8.
Installation with ASSY to exchange it with the stock front bumper, changes from the expression of lancer evolution 8 to the spirit œ›.
In addition, not only does it look good, in order to raise the cooling efficiency while in the midst of travelling you design, in order to be able to obtain downforce, you design e.g., the air duct is gained in the oil cooler rear.
< Net 4 place > The right duct section, the left duct section and grille section, O/C outlet
< Net 5 place > Description above + I/C front section
* When the front bumper is exchanged, the baffle plate of the oil cooler stops being attached, that way times when oil temperature rises from before are, also becomes cause of engine trouble. We request the fact that the air kind of guide who applies each one and the wind is produced.
* The grille section central emblem is sold separately (user limitation).
* FRP (finished in black gel coat)
The right (oil cooler side)
http://www.kansaiss.co.jp/parts/kam3334.htm
it says something about the baffle plate of the oil cool becoming unattached when u install the kit. Also, anyone get the difference between the net 4 place and the net 5 place kits? (could net 5 place maybe mean 5 pieces?).
Heres a ****ty translation, see what u make of this:
Lancer evolution VIII (CT9A)
Front bumper
KAM033 price XXYEN 86,000 (4 nets)
KAM034 price XXYEN 88,000 (5 nets)
When one is dissatisfied with the stock bumper, there is a new bumper for lancer evolution 8.
Installation with ASSY to exchange it with the stock front bumper, changes from the expression of lancer evolution 8 to the spirit œ›.
In addition, not only does it look good, in order to raise the cooling efficiency while in the midst of travelling you design, in order to be able to obtain downforce, you design e.g., the air duct is gained in the oil cooler rear.
< Net 4 place > The right duct section, the left duct section and grille section, O/C outlet
< Net 5 place > Description above + I/C front section
* When the front bumper is exchanged, the baffle plate of the oil cooler stops being attached, that way times when oil temperature rises from before are, also becomes cause of engine trouble. We request the fact that the air kind of guide who applies each one and the wind is produced.
* The grille section central emblem is sold separately (user limitation).
* FRP (finished in black gel coat)
The right (oil cooler side)
Newbie
Joined: Jul 2003
Posts: 6
Likes: 0
From: .
I voted for GIALLA until I saw their VIII kit... I guess I am the only one that really doesn't like the mitsu emblem that is engraved on the front? :P Pontiac does come to mind...
PS: That wide-body VII looks pretty nice, where is its VIII counterpart?
PS: That wide-body VII looks pretty nice, where is its VIII counterpart?
Originally posted by shineNGstar
those arent evos tho... i personally like the c-west one. ill probably get one, paint my car green and get black rims with a green lip. but the suspension/engine come first. >=D mwuahahha
those arent evos tho... i personally like the c-west one. ill probably get one, paint my car green and get black rims with a green lip. but the suspension/engine come first. >=D mwuahahha
Yeah, you won't need to worry about the cops noticing you then...
I like those Kenstyle kits - very clean - I esp. like the side skirts. I think the Gialla hood, the C-West front and rear bumpers with the stock wing would look best.
Newbie
Joined: May 2003
Posts: 96
Likes: 0
From: Northern Illinois
Originally posted by David21186
Im not going to lie, on some cars wide-body just does not look good like on boxed out accored's. Thats a NO...NO!
Im not going to lie, on some cars wide-body just does not look good like on boxed out accored's. Thats a NO...NO!
Thread Starter
Evolving Member
Joined: Feb 2003
Posts: 157
Likes: 0
From: Miami, FL
Originally posted by Jiggbobo
accords? I had a 98 accord coupe with a partial wide body kit and it looked awsome. the car is not boxed out at all.
accords? I had a 98 accord coupe with a partial wide body kit and it looked awsome. the car is not boxed out at all.
Evolving Member
Joined: Sep 2002
Posts: 350
Likes: 0
From: Birth place of the EVO
Originally posted by Revolutionary
did anyone try to read the kansai site?
http://www.kansaiss.co.jp/parts/kam3334.htm
it says something about the baffle plate of the oil cool becoming unattached when u install the kit. Also, anyone get the difference between the net 4 place and the net 5 place kits? (could net 5 place maybe mean 5 pieces?).
Heres a ****ty translation, see what u make of this:
Lancer evolution VIII (CT9A)
Front bumper
KAM033 price XXYEN 86,000 (4 nets)
KAM034 price XXYEN 88,000 (5 nets)
When one is dissatisfied with the stock bumper, there is a new bumper for lancer evolution 8.
Installation with ASSY to exchange it with the stock front bumper, changes from the expression of lancer evolution 8 to the spirit œ›.
In addition, not only does it look good, in order to raise the cooling efficiency while in the midst of travelling you design, in order to be able to obtain downforce, you design e.g., the air duct is gained in the oil cooler rear.
< Net 4 place > The right duct section, the left duct section and grille section, O/C outlet
< Net 5 place > Description above + I/C front section
* When the front bumper is exchanged, the baffle plate of the oil cooler stops being attached, that way times when oil temperature rises from before are, also becomes cause of engine trouble. We request the fact that the air kind of guide who applies each one and the wind is produced.
* The grille section central emblem is sold separately (user limitation).
* FRP (finished in black gel coat)
The right (oil cooler side)
did anyone try to read the kansai site?
http://www.kansaiss.co.jp/parts/kam3334.htm
it says something about the baffle plate of the oil cool becoming unattached when u install the kit. Also, anyone get the difference between the net 4 place and the net 5 place kits? (could net 5 place maybe mean 5 pieces?).
Heres a ****ty translation, see what u make of this:
Lancer evolution VIII (CT9A)
Front bumper
KAM033 price XXYEN 86,000 (4 nets)
KAM034 price XXYEN 88,000 (5 nets)
When one is dissatisfied with the stock bumper, there is a new bumper for lancer evolution 8.
Installation with ASSY to exchange it with the stock front bumper, changes from the expression of lancer evolution 8 to the spirit œ›.
In addition, not only does it look good, in order to raise the cooling efficiency while in the midst of travelling you design, in order to be able to obtain downforce, you design e.g., the air duct is gained in the oil cooler rear.
< Net 4 place > The right duct section, the left duct section and grille section, O/C outlet
< Net 5 place > Description above + I/C front section
* When the front bumper is exchanged, the baffle plate of the oil cooler stops being attached, that way times when oil temperature rises from before are, also becomes cause of engine trouble. We request the fact that the air kind of guide who applies each one and the wind is produced.
* The grille section central emblem is sold separately (user limitation).
* FRP (finished in black gel coat)
The right (oil cooler side)
Ok...it says in order to full advantage of the front bumper design. The air guide housing for the stock oil cooler should also be purchased KAM037. These is only suggested if you decided to keep your stock oil cooler. You got the part about the net (grill mesh) right.
Cyber Evo
