Notices
Evo Show / Shine Post your pictures, photoshops, and videos!

Official "RS" Owners Gallery / Thread

Thread Tools
 
Search this Thread
 
Old Feb 5, 2010 | 05:10 AM
  #16  
Ichimaru's Avatar
Newbie
 
Joined: Dec 2007
Posts: 75
Likes: 0
From: In my car.
This is my 9RS.

Owned the car for 2 1/2 years and it went through a couple of setups.

When i just got the car

It was running Power Enterprise 1000CC injectors, GReddy Type R intercooler, Kansai Intake manifold, Tomei 280 Non mivec Cams, ECU by Apexi Power FC, Buschur 20G, Aragosta Suspension, AP Racing 6 Pot front 4 pot rear brakes.
Stock 2litre engine.

Chrome Ce28 with Rear 4 pot brakes



This is when i just bought the car and had H.I.D's installed.


Car was tuned on Race exhaust and i was using it for daily driving. So with a different exhaust, had to do a retune


Then i got a Varis Carbon Boot and Voltex 5V GT Wing


Got Voltex Rear Defuser to match the boot and wing

Went for a local short sprint and bought Buddy Club P1 Rims and removed the Wing for the Drag.


Ordered a Carbon bonnet but havent arrived.


Carbon Bonnet Arrived



Then i got a APEXi RX6 Turbo Kit with Water Cooled waste gate and had the engine bay done up. Turbo kit came with Exhaust manifold, waste gate, and 3 inch down pipe





My inspiration for a build came from The Original Runduce Evo. I was building my car to output the same power and was trying to use the same parts.



Unfortunately I encountered certain problems with work that made me suffer severe financial problems so i had to sell the carbon parts

Ended up looking like this


Then problems didnt get better so i sold off lots of parts including intercooler, intake manifold, Tomei 280 Cams, Full turbo kit and ECU.

So i was running fully stock (Stock turbo, stock cams, stock EVERYTHING) for a period of time with Stock ECU.

I didnt bother taking pictures of my ride after the demod cause it was really demoralising to look at...

Then now as things are looking up, The car is slowly coming back together again.
I dont have pictures of my most updated setup. Just got basic stuffs back on the car are:

Zietronix Wideband O2 Sensor
FP Red Turbo
Custom O2 dump turbo outlet
Custom 3 Inch Downpipe

On the Way : ETS 3.5 / 4 Inch intercooler. (Havent decided which to order yet)

And i'm working together with a relative and a close friend of mine to start up a Aero Kits company in doing Front lips, Side Skirts and Wings Etc.

Here's how my car looks now with my Street Version Front lip in FRP with Carbon version on the way. Also coming are side skirts, And GT Wing.
(doing a engine bay wash..
Didnt maintain the engine bay after the demod till i recently picked up the habit again)



Last edited by Ichimaru; Feb 6, 2010 at 02:07 AM.
Reply
Old Feb 5, 2010 | 05:13 AM
  #17  
Jeffroevoix's Avatar
Evolving Member
 
Joined: Feb 2008
Posts: 344
Likes: 0
From: SE-PA
Heres my RS. I got her new in Dec of 2005. Best car I have ever owened period. I see myself keeping it forever.
MODS
Cobb TBE
Cone Filter
Bilstiens/gtworx combo
Tien camber plates and pillowball mounts
Lowered seats
Cheap stereo. I think I even asked the guy how much the whole stereo weighed
JDM rear
RS badge

Name:  ers126.jpg
Views: 0
Size:  113.2 KB



Reply
Old Feb 5, 2010 | 05:40 AM
  #18  
06RS's Avatar
Evolving Member
iTrader: (37)
 
Joined: May 2006
Posts: 402
Likes: 0
From: Denver, CO
Purchased new in May 2006. The car was relieved of daily driving duties after three years. The car is tastefully modified.

Name:  10-25AutoX-1.jpg
Views: 0
Size:  64.1 KB

Name:  4126682433_73db0d8a85_b.jpg
Views: 0
Size:  61.3 KB

Name:  4129632967_aabaf1d35c_b.jpg
Views: 0
Size:  62.0 KB


Last edited by 06RS; Feb 5, 2010 at 06:31 AM.
Reply
Old Feb 5, 2010 | 06:30 AM
  #19  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
Originally Posted by Ichimaru
This is my 9RS.

Owned the car for 2 1/2 years and it went through a couple of setups.

When i just got the car

It was running Power Enterprise 1000CC injectors, GReddy Type R intercooler, Kansai Intake manifold, Tomei 280 Non mivec Cams, ECU by Apexi Power FC, Buschur 20G, Aragosta Suspension, AP Racing 6 Pot front 4 pot rear brakes.
Stock 2litre engine.

Chrome Ce28 with Rear 4 pot brakes
Just curious where you got the chrome ce28 are they for sale?
Reply
Old Feb 5, 2010 | 06:32 AM
  #20  
Ichimaru's Avatar
Newbie
 
Joined: Dec 2007
Posts: 75
Likes: 0
From: In my car.
Chrome Ce28's were specially made for varis by Volks. My Work shop had them special indented and that was quite long ago... Not to sure if they still do it now... they are the distributor for varis parts here

Last edited by Ichimaru; Feb 5, 2010 at 06:35 AM.
Reply
Old Feb 5, 2010 | 06:46 AM
  #21  
Dube's Avatar
Evolving Member
iTrader: (4)
 
Joined: Jan 2010
Posts: 194
Likes: 0
From: Enfield, CT
Originally Posted by 06RS
Purchased new in May 2006. The car was relieved of daily driving duties after three years. The car is tastefully modified.

Thats awesome...
Reply
Old Feb 5, 2010 | 06:59 AM
  #22  
Timujin's Avatar
Evolving Member
iTrader: (3)
 
Joined: Nov 2004
Posts: 321
Likes: 0
From: SoCal
Here is how the current RS was purchased. Dumped on HKS coilovers with Grams.



I haven't taken pics of it since installing GTWorks and MR Bilsteins.


Also included is my 06 WW RS I sold in anticipation of getting an X. I'm keekee my *** for selling the WW RS. The X fails for me and the RR RS will stay for long time. More pics of the RR RS coming soon.

Reply
Old Feb 5, 2010 | 07:10 AM
  #23  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
Originally Posted by Ichimaru
Chrome Ce28's were specially made for varis by Volks. My Work shop had them special indented and that was quite long ago... Not to sure if they still do it now... they are the distributor for varis parts here
any chance of selling them?
Reply
Old Feb 5, 2010 | 07:11 AM
  #24  
MinusPrevious's Avatar
Thread Starter
EvoM Staff Alumni
iTrader: (3)
 
Joined: May 2008
Posts: 7,704
Likes: 1,387
From: So.Cal
Well done, all of you, for participating in our "RS" specific thread. On behalf of all "RS" owners we Thank you!!!
Reply
Old Feb 5, 2010 | 07:16 AM
  #25  
Domolution's Avatar
Account Disabled
iTrader: (74)
 
Joined: Feb 2009
Posts: 1,392
Likes: 1
From: Somewhere in the states. :)
SoOO many sexy RSs!
WEEE!!
Reply
Old Feb 5, 2010 | 07:27 AM
  #26  
FathouseFab's Avatar
Former Sponsor
iTrader: (5)
 
Joined: Feb 2006
Posts: 1,214
Likes: 0
From: Indy
Some good looking cars here! Here are a few pics of mine. And watch the vid in my sig.





Fathouse
Reply
Old Feb 5, 2010 | 09:13 AM
  #27  
Coppi5151's Avatar
Newbie
 
Joined: Feb 2009
Posts: 96
Likes: 6
From: Abiko desu
My WW IX RS. Commutes have never been so fun!

Reply
Old Feb 5, 2010 | 10:18 AM
  #28  
bryant's Avatar
Evolving Member
iTrader: (1)
 
Joined: Jun 2006
Posts: 123
Likes: 0
From: Mountain Country, Utah
Bought my RS brand new. Even had the dealer not touch anything and drove home with all the plastic still on the seats.










When I got home first thing was to install the JDM rear bumper.




Next up was suspention, wheels, and tires.






More wheels to come. Maybe some motor stuff later, but I really like the car in its stock form. Still no radio and my friends hate me for it ha ha.
Reply
Old Feb 5, 2010 | 11:04 AM
  #29  
darkdrifter's Avatar
Newbie
 
Joined: Feb 2008
Posts: 62
Likes: 0
From: Londonderry,NH
I love my little RS. :-)
Name:  philo110-1.jpg
Views: 0
Size:  108.5 KB
Name:  2690601111_db0f533858_o.jpg
Views: 0
Size:  43.5 KB
Reply
Old Feb 5, 2010 | 12:13 PM
  #30  
Ichimaru's Avatar
Newbie
 
Joined: Dec 2007
Posts: 75
Likes: 0
From: In my car.
Originally Posted by RockmanX
any chance of selling them?
hehe no sorry. they're limited edition and rare over here.. plus they're gonna be my track rims after i sell off my buddy clubs and get a set of 18" rims for daily driving.
Reply



All times are GMT -7. The time now is 06:45 AM.