Here's my Zeitronix install :)
#17
Evolved Member
iTrader: (55)
Join Date: Aug 2006
Location: Monroe - WA
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
^probably do a little swap-eroo with yours, or maybe from your 2nd Evo so it is ready to go for a quick swap.
Nice write-up for people to follow; lots of mods people could do working off of these designs!
Nice write-up for people to follow; lots of mods people could do working off of these designs!
#25
Looks great! Clean install.
If you do this with the ZR-2 gauge you may want to consider soldering two wires where the switch is on the ZR-2 board and running those to an external switch. This would give you AFR, EGT, Vacuum/Boost gauge, with option to make it oil/fuel pressure, water/oil temperature gauge. One gauge would do it all inside the dash.
If you do this with the ZR-2 gauge you may want to consider soldering two wires where the switch is on the ZR-2 board and running those to an external switch. This would give you AFR, EGT, Vacuum/Boost gauge, with option to make it oil/fuel pressure, water/oil temperature gauge. One gauge would do it all inside the dash.