View Poll Results: What do you think
Voters: 84. You may not vote on this poll
Updated: Stereo system install
Thread Starter
Evolving Member
iTrader: (12)
Joined: Jan 2004
Posts: 426
Likes: 0
From: Las Vegas, Nv
I listen mostly to hard rock so that is why i chose 10's. Yes they are 10's. They have really good high bass and can also hit really low. Inside i have all new components, front and back so they get pretty loud. I'm not to worried about not having a spare if i do get a flat i have AAA. Thanks for all the comments. All in all it probably took me about 3 days to get it all complete. And i do mean days 72 hours. bELOW IS PICTURES OF THE TWEETERS AND WHAT IT LOOKED LIKE BEFORE.
you did well with the finished product. those are 10s??? jeez they are deep.
I don't bother removing my system for autocross and I doubt I will for track days either. It's about 100lb including the false floor and it's quite securely bolted in through the floorpan, so there's little reason to remove it. I weigh 160lb, so I figure I'm even with some of the 'larger' Evo owners now.
I don't bother removing my system for autocross and I doubt I will for track days either. It's about 100lb including the false floor and it's quite securely bolted in through the floorpan, so there's little reason to remove it. I weigh 160lb, so I figure I'm even with some of the 'larger' Evo owners now.
wow, you went out all the way - showcar quality!
so, what do you mean it looked before? did you already change it?
fyi, I've installed JL XR comps in my RS, I placed the tweeters on the triangle remote back window panel. I used to run like your tweeters on door panels but found the window panels as better imaging position.
also, running 4 ch Eclipse amp + JL p600.1 amp for single 12" Alpine Type R sealed. This 12" is not bad at all, much tighter than other 12"s I've heard. I still get tight fast response but much louder than even two 10"s I used to have.
oh, all controlled by Eclipse 8485 HU and delpi XM controller. Delpi sucks big time, sounds muffled even though its going to RCA Aux to HU...
But with my exhaust growls, it's hard to appreciate the fine acoustics of system...lol
so, what do you mean it looked before? did you already change it?
fyi, I've installed JL XR comps in my RS, I placed the tweeters on the triangle remote back window panel. I used to run like your tweeters on door panels but found the window panels as better imaging position.
also, running 4 ch Eclipse amp + JL p600.1 amp for single 12" Alpine Type R sealed. This 12" is not bad at all, much tighter than other 12"s I've heard. I still get tight fast response but much louder than even two 10"s I used to have.
oh, all controlled by Eclipse 8485 HU and delpi XM controller. Delpi sucks big time, sounds muffled even though its going to RCA Aux to HU...
But with my exhaust growls, it's hard to appreciate the fine acoustics of system...lol
Thread Starter
Evolving Member
iTrader: (12)
Joined: Jan 2004
Posts: 426
Likes: 0
From: Las Vegas, Nv
Yea before all the wires were exposed and i had a qlogic box. I hid all the wires and made a custom box. Your system sounds nice. Pics? And yeah they are deep for 10" 160 oz magnets on em.
















