EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo Show / Shine (https://www.evolutionm.net/forums/evo-show-shine-86/)
-   -   Its never too late to start a "build" thread right? :) (https://www.evolutionm.net/forums/evo-show-shine/537562-its-never-too-late-start-build-thread-right.html)

bnr34rb26dett Feb 2, 2011 01:44 PM

CZero Media's Its never too late to start a build thread right? Built 2.0 650whp Goal
 
3 Attachment(s)
So my evo is pretty much built already so i should really call this a MOD thread, which has been turning into a picture thread since i just bought my first DSLR:lol:

i hope my mod list will help those who are looking to go fp black or something similar
Or make you drool for those who are still stock

My goal is street driven 650AWHP Voltexed out evo.

This thread will be picture heavy {thumbup}


[SIZE="3"]Motor swap was done by AWD Motorsports

Tuned by Petey at KHC{thumbup}
Motor
Motor

Built Buschur 2.0
Buschur Stage 3 Head
Ported FP Black

- Custom BR dual stainless steel valve springs
- BR titanium retainers
- New Valve Seals
- BR stainless 1 mm over intake valves
- BR stainless 1 mm over exhaust valves
- Stainless Oring around each combustion chamber
- Complete port & polish job
- Stainless Steel O-Ring

Crower Rods
Je Pistons
L19 Arp Headstuds / Main studs
Buschur BF 272 Cams
Buschur Race Core FMIC
Buschur Race LICP
Buschur UICP
Buschur 65MM Ported Throttle Body
Buschur Ported Intake Manifold
Buschur Balance Shaft Eliminator
Buschur inline MBC
Buschur Short Ram intake
AWD Motorsports Billet Motor Mount Kit
PTE 1000cc Injectors
NGK BPR8ES spark plugs
JD Customs COP
Walbro 255 Fuel Pump
Tial QR BOV
JMF Catch Can
STM Oil Cooler Kit
Koyo Radiator
Toxic Fab Exhaust Manifold
Toxic Fab Cam angle sensor shield
2G/Evo Oem Exhaust Manifold Stud and Nut Kit
Perrin Heatwrapped DP
Coated JMF O2 Hood Dump
Custom Side Skirt Side Exit Exhaust
Taylor Battery Relocation

Zaklee Evo 8 Clear Cam Cover
Evo VII-IX Samco Coolant Hoses
HKS Oil Cap
Greddy 1.3 Bar Radiator Cap
Mishimoto Evo Air Diversion Plate Matte Silver
STM Evo VIII-IX Polished Radiator Brackets

Oil
AMSOIL AMOQT-EA 10W40 (Engine Oil)

Transaxle Gear Lube 75W-90 MTGQT-EA (Transmission)
Red Line 58104 80W140 (T- Case/ Rear Diff)

Transmission/ Suspension

Buschur's Buschwacker Transmission
Buschur Racing Evo Shifter Bushings (5-Speed)
Torque Solution Shifter Base Bushing Kit
Exedy Twin HD Clutch
Buschur Short Shifter
STM Clutch Fork Stop
Rear diff restacked and rebuilt

Whiteline Rear Control Arm Bushing- lower inner W62951
Whiteline Rear Control Arm Bushing- lower outer W62950
Whiteline Rear Control Arm Bushing- lower shock W32958
Whiteline Rear Diff Mount Bushings
Whiteline Rear Trailing Arm Bushings
Perrin adjustable rear sway bar
AP Adjustable rear end links
Fortune Auto 500 8/9 w/ Swift Spring Upgrade/ Roller Bearing Upgrade

Project Mu Club Sport Brake Pads
StopTech Slotted Front/Rear Rotors
ATE Super Blue
Techna-Fit SS Brake Lines
ARP extended wheel studs

Enkei NT03 18x9.5 +27
275/35/18 Potenza RE11s
Muteki SR48 Lug Nuts

Interrior

MR Center Console
Radio Relocation Kit
Kenwood KVT-514 DVD player
AEM Wideband
AEM Digital Boost Gauge
Innovate Oil P/ T Gauge
Escort 9500ix/ Garmin 765 Hardwired
Super Bright LEDS Dome/Trunk/Indicator lights
Rallye 3 ASM Schroth racing harnesses
Bride Armrest Cover
Binary Engineering Seat Lowering Brackets

Exterior

JDM tail lights
JDM Rear Bumper
JDM Rear Crash Beam
Voltex Side Skirts
Voltex Front Bumper
Cleared and Blacked Out Headlights
CZeroMedia Vortex Generator
Hood Damper
Rexpeed Polarized Mirrors[/SIZE]



From this
Attachment 289781

to
These (current look)

Attachment 289782





BOOSTINAT30PSI Feb 2, 2011 06:12 PM

:)

ChrisCarey Feb 7, 2011 08:51 AM

Looking good :)

Jay10Ralliart Feb 7, 2011 11:16 AM

Beautiful car man....what kinda numbers you pushing with all those mods?!

nismos13sleeper Feb 7, 2011 02:21 PM

cool. u should go like a HTA 35r big inlet .82 hottside ull be makin some serious ****in jam on pump gas and alot more on E85.u got the mods to back it up

antwon6420 Feb 8, 2011 12:14 AM

Slick looking car man{thumbup}. Let me know if You're ever ready to sell!!

bnr34rb26dett Feb 8, 2011 07:16 PM

7 Attachment(s)
DAY 1 behind my Subie ;)
Ugly tail lights gotta go ASAP!
Attachment 289723


Radiator replacement/ AEM wideband install

Attachment 289724
http://i719.photobucket.com/albums/w...dett/EVO/3.jpg
Attachment 289725
http://i719.photobucket.com/albums/w...dett/EVO/1.jpg

JDM tail lights!

Attachment 289726
Attachment 289727

ETS DP back exhaust installed
http://i719.photobucket.com/albums/w...dett/EVO/6.jpg
Attachment 289728

JDM rainguard, vortex gen installed
Attachment 289729


Evo 8 bumper coming off + rally armor mudflaps!
http://i719.photobucket.com/albums/w...120_140218.jpg
http://i719.photobucket.com/albums/w...120_140243.jpg

Evo 9d ( still gotta put the grills in)
http://i719.photobucket.com/albums/w...124_154636.jpg
http://i719.photobucket.com/albums/w...124_154652.jpg





Originally Posted by Jay10Ralliart (Post 9055632)
Beautiful car man....what kinda numbers you pushing with all those mods?!

i believe it was around 400 on stock 9 turbo

Originally Posted by nismos13sleeper (Post 9056178)
cool. u should go like a HTA 35r big inlet .82 hottside ull be makin some serious ****in jam on pump gas and alot more on E85.u got the mods to back it up

yehhh im just not looking for high numbers... i want high power at lowwe rpm and its a DD

Originally Posted by antwon6420 (Post 9057603)
Slick looking car man{thumbup}. Let me know if You're ever ready to sell!!

:lol:

bnr34rb26dett Feb 8, 2011 07:19 PM

2 Attachment(s)
Attachment 289721
Attachment 289722

thanks to collin @ Toxicfab
i get to see my manifold as it gets built into a sexy art piece

Darkn3s Feb 8, 2011 07:45 PM

looks good man.. what kind of mani is he making

ToxicFab Feb 8, 2011 08:07 PM


Originally Posted by Darkn3s (Post 9060465)
looks good man.. what kind of mani is he making

I'm building the stock replacement manifold:) sending another pic soon!

FLOW1 Feb 8, 2011 08:14 PM

Nice, keep it up.

Quesadilla Feb 8, 2011 09:01 PM

Can't wait to see that stock exhaust manifold get chucked. Looks good!

bnr34rb26dett Feb 10, 2011 04:51 PM


Originally Posted by Collin@ToxicFab (Post 9060513)
I'm building the stock replacement manifold:) sending another pic soon!

yes sir! cant wait to put it on the car{thumbup}

in the mean time, i got prosport halo gauges installed!
http://www.youtube.com/watch?v=r0M6_...layer_embedded
http://www.youtube.com/watch?v=RBZQVEMq22g

wht95scort Feb 10, 2011 06:08 PM

Build looks good. cant wait to see more pics. Where did you work on the car in your jobs filing room?

integrate916 Feb 10, 2011 06:51 PM

moar pics


All times are GMT -7. The time now is 01:11 AM.


© 2024 MH Sub I, LLC dba Internet Brands