CZero Media's Its never too late to start a build thread right? Built 2.0 650whp Goal
 

So my evo is pretty much built already so i should really call this a MOD thread, which has been turning into a picture thread since i just bought my first DSLR:lol:

i hope my mod list will help those who are looking to go fp black or something similar
Or make you drool for those who are still stock

My goal is street driven 650AWHP Voltexed out evo.

This thread will be picture heavy {thumbup}


[SIZE="3"]Motor swap was done by AWD Motorsports

Tuned by Petey at KHC{thumbup}
Motor
Motor

Built Buschur 2.0
Buschur Stage 3 Head
Ported FP Black

- Custom BR dual stainless steel valve springs
- BR titanium retainers
- New Valve Seals
- BR stainless 1 mm over intake valves
- BR stainless 1 mm over exhaust valves
- Stainless Oring around each combustion chamber
- Complete port & polish job
- Stainless Steel O-Ring

Crower Rods
Je Pistons
L19 Arp Headstuds / Main studs
Buschur BF 272 Cams
Buschur Race Core FMIC
Buschur Race LICP
Buschur UICP
Buschur 65MM Ported Throttle Body
Buschur Ported Intake Manifold
Buschur Balance Shaft Eliminator
Buschur inline MBC
Buschur Short Ram intake
AWD Motorsports Billet Motor Mount Kit
PTE 1000cc Injectors
NGK BPR8ES spark plugs
JD Customs COP
Walbro 255 Fuel Pump
Tial QR BOV
JMF Catch Can
STM Oil Cooler Kit
Koyo Radiator
Toxic Fab Exhaust Manifold
Toxic Fab Cam angle sensor shield
2G/Evo Oem Exhaust Manifold Stud and Nut Kit
Perrin Heatwrapped DP
Coated JMF O2 Hood Dump
Custom Side Skirt Side Exit Exhaust
Taylor Battery Relocation

Zaklee Evo 8 Clear Cam Cover
Evo VII-IX Samco Coolant Hoses
HKS Oil Cap
Greddy 1.3 Bar Radiator Cap
Mishimoto Evo Air Diversion Plate Matte Silver
STM Evo VIII-IX Polished Radiator Brackets

Oil
AMSOIL AMOQT-EA 10W40 (Engine Oil)

Transaxle Gear Lube 75W-90 MTGQT-EA (Transmission)
Red Line 58104 80W140 (T- Case/ Rear Diff)

Transmission/ Suspension

Buschur's Buschwacker Transmission
Buschur Racing Evo Shifter Bushings (5-Speed)
Torque Solution Shifter Base Bushing Kit
Exedy Twin HD Clutch
Buschur Short Shifter
STM Clutch Fork Stop
Rear diff restacked and rebuilt

Whiteline Rear Control Arm Bushing- lower inner W62951
Whiteline Rear Control Arm Bushing- lower outer W62950
Whiteline Rear Control Arm Bushing- lower shock W32958
Whiteline Rear Diff Mount Bushings
Whiteline Rear Trailing Arm Bushings
Perrin adjustable rear sway bar
AP Adjustable rear end links
Fortune Auto 500 8/9 w/ Swift Spring Upgrade/ Roller Bearing Upgrade

Project Mu Club Sport Brake Pads
StopTech Slotted Front/Rear Rotors
ATE Super Blue
Techna-Fit SS Brake Lines
ARP extended wheel studs

Enkei NT03 18x9.5 +27
275/35/18 Potenza RE11s
Muteki SR48 Lug Nuts

Interrior

MR Center Console
Radio Relocation Kit
Kenwood KVT-514 DVD player
AEM Wideband
AEM Digital Boost Gauge
Innovate Oil P/ T Gauge
Escort 9500ix/ Garmin 765 Hardwired
Super Bright LEDS Dome/Trunk/Indicator lights
Rallye 3 ASM Schroth racing harnesses
Bride Armrest Cover
Binary Engineering Seat Lowering Brackets

Exterior

JDM tail lights
JDM Rear Bumper
JDM Rear Crash Beam
Voltex Side Skirts
Voltex Front Bumper
Cleared and Blacked Out Headlights
CZeroMedia Vortex Generator
Hood Damper
Rexpeed Polarized Mirrors[/SIZE]



From this
Attachment 289781

to
These (current look)

Attachment 289782

:)

Looking good :)

Beautiful car man....what kinda numbers you pushing with all those mods?!

cool. u should go like a HTA 35r big inlet .82 hottside ull be makin some serious ****in jam on pump gas and alot more on E85.u got the mods to back it up

Slick looking car man{thumbup}. Let me know if You're ever ready to sell!!

DAY 1 behind my Subie ;)
Ugly tail lights gotta go ASAP!
Attachment 289723


Radiator replacement/ AEM wideband install

Attachment 289724
http://i719.photobucket.com/albums/w...dett/EVO/3.jpg
Attachment 289725
http://i719.photobucket.com/albums/w...dett/EVO/1.jpg

JDM tail lights!

Attachment 289726
Attachment 289727

ETS DP back exhaust installed
http://i719.photobucket.com/albums/w...dett/EVO/6.jpg
Attachment 289728

JDM rainguard, vortex gen installed
Attachment 289729


Evo 8 bumper coming off + rally armor mudflaps!
http://i719.photobucket.com/albums/w...120_140218.jpg
http://i719.photobucket.com/albums/w...120_140243.jpg

Evo 9d ( still gotta put the grills in)
http://i719.photobucket.com/albums/w...124_154636.jpg
http://i719.photobucket.com/albums/w...124_154652.jpg




i believe it was around 400 on stock 9 turbo
yehhh im just not looking for high numbers... i want high power at lowwe rpm and its a DD
:lol:

Attachment 289721
Attachment 289722

thanks to collin @ Toxicfab
i get to see my manifold as it gets built into a sexy art piece

looks good man.. what kind of mani is he making

I'm building the stock replacement manifold:) sending another pic soon!

Nice, keep it up.

Can't wait to see that stock exhaust manifold get chucked. Looks good!

yes sir! cant wait to put it on the car{thumbup}

in the mean time, i got prosport halo gauges installed!
http://www.youtube.com/watch?v=r0M6_...layer_embedded
http://www.youtube.com/watch?v=RBZQVEMq22g

Build looks good. cant wait to see more pics. Where did you work on the car in your jobs filing room?

moar pics

I guess I missed something in the gauge world. In the center console, what are the lights to the lower right of each gauge? What does the far right one indicate by blinking? Can you buy this full setup? I may have to rethink my nav setup, HA!

Very nice build btw! {thumbup}

nice car ;) when ever u in the tristate area hit me up so i can show u the new front!

It's never too late! I love build threads.

lol thats my school garage actually

check this out
http://www.youtube.com/watch?v=MuhnNljkFTc
the far right one is blinking because its not hooked up yet.. fuel pressure. im trying to figure out where and how to hook this one up.

coming! :lol:

yea man good luck with the body work

{thumbup}

Looks good and more pics

toxic fab manifold is coming along nicely.

http://i719.photobucket.com/albums/w...gejpeg_2_2.jpg

polished and waxed (cell phone pics)

http://i719.photobucket.com/albums/w...211_173709.jpg
http://i719.photobucket.com/albums/w...211_173645.jpg
http://i719.photobucket.com/albums/w...211_173636.jpg

Looks nice man. Keep us updated on the progress :)

thanks to adam @ Maperformance
Attachment 289622

oh whats this???

Attachment 289623

FP BLACK!!!! Ported with 25psi WG

Attachment 289624
Attachment 289625
Attachment 289626

JMF catch can/ exhaust manifold gasket

Attachment 289627
Attachment 289628

More pics, great project.

Nice...

nice shop...the brighter the better. I wish I had a plce like that to work on my car...looking good

I got my hood dampers in the mail today :)
http://i719.photobucket.com/albums/w...217_114633.jpg

And installed {thumbup}
I wasnt sure at first but it looks good and functional. i highly recommend spending that extra cash and getting this
http://i719.photobucket.com/albums/w...217_124606.jpg

And some more goodies:D
http://i719.photobucket.com/albums/w...217_120058.jpg

I like the all black look of the dampers. What brand is that? PM if you want.

You will need that GPS escort :)

is that a subaru bypass valve?

Thats a 1g dsm bov, prolly the best stock bov next to the 9 mr bov.

ah.. my ix rs bpv must be teh suck :(

lol.. jp. Good idea, kind of neat to see a 20 year old piece of technology stand up next to the 20 years newer version, wiht the inbetweens.. generally sucking

I got all new bolts/ nuts/ studs for my new turbo setup. here are the part numbers for anyone who might need these in the future.

MD050073
MD062961
MN119783
MD132933

http://evo8.initialdproject.com/HowT...rbo/turbo1.jpg
https://www.evolutionm.net/forums/ev...-get-them.html

Thanks to collin@toxicfab.
this beautiful piece of art work came in today :eek:
and black cam angle sensor shield

Attachment 289536
Attachment 289537
Attachment 289538
Attachment 289539
Attachment 289540
Attachment 289541
Attachment 289542
Attachment 289543
Attachment 289544
Attachment 289545
Attachment 289546
Attachment 289547
Attachment 289548
Attachment 289549
Attachment 289550
http://i719.photobucket.com/albums/w..._7142529_n.jpg
http://i719.photobucket.com/albums/w..._6329409_n.jpg
http://i719.photobucket.com/albums/w..._1079416_n.jpg

This thing is truly a piece of art. I mean look at those welds!
I cant wait to put this thing on. Im wondering how its gonna change my exhaust note also :confused::lol:

Very nice build! cant wait to see what power you make with everything installed!


god i love build threads :)

{thumbup}

Subscribed! This is gonna be a beast. I really like that school shop you have access too!

thanks! you are the first one to figure that out lol:lol:

The file cabinets were the give away! {thumbup}

Looking good man! Good luck!

:lol::lol::lol:

thanks!

MMMMM More packages!! :lol:

Thanks to STM for fast shipping on
Samco hoses (My upper pipe was hitting the clutch link or something and i was able to point it out before a puncture)
and
Exhaust Manifold Stud and Nut Kit

Attachment 289467

Thanks to 06-EVO-9-MR I got my Schroth seat belts!
Attachment 289468

And a seat cowl for my other baby (R6)
Attachment 289469

more packages. i like packages.

http://i719.photobucket.com/albums/w...314_150002.jpg


i also ordered this today.

http://khdphoto.com/wp-content/uploa.../japanhope.jpg

Rock out this cool sticker while helping out Japan by making a donation. {thumbup}
http://khdphoto.com/visiondynamix/hopejapan2011

Although I live in the states, I also have a house in Japan and things are getting worse day by day. Every donation counts!:eek:

x2

Very nice, keep us updated.

grreeeeaattt build....keep us posted...love the taillights and the manifold...

Nice build should be a rocket.

I have an 05 R6 as well, by far the best year with all the extra goodies!

thank you sir, for your dedication and effort in making high quality parts for Evos


thanks! cant wait for it to get installed

05R6 FTW! i cant wait to do a pull of r6 vs fp black evo :D

Tial QR has arrived
now everything is in my hands and ready for installation!

http://i719.photobucket.com/albums/w...317_131416.jpg
http://i719.photobucket.com/albums/w...317_131406.jpg
http://i719.photobucket.com/albums/w...317_131345.jpg

looking good. looking really good {thumbup}

Thanks for this but could you confirm the quantities of each nut and bolt you ordered.

2xMD050073 nuts for o2 to turbo studs
3xMD062961 bolts for 02 to turbo
4xMN119783 bolts for turbo to mani
9xMD132933 washers for both

You got rid of the two studs on the turbo to manifold side and replaced it with 4 bolts for ease of install/removal right?

Also it looks like your FP turbo came with two studs for the o2 housing side. You didn't replace those just bought nuts and washers for them right?

Thanks again!

sorry for the late reply i just got back in the states


2 MD050073 NUT
3 MD062961 T/C
4 MN119783 BOLT
9 MD132933 T/C

is what i ordered

and yes to both questions
good luck{thumbup}

Thanks man! Where did you order the hardware from? Russell from mitsubishi.net?

I just realized you are using a tubular manifold, I'm not sure I can replace the studs with bolts for a ported stocker cause the heads on the bolts are too big... hmmm I'll have to look into that but if you or anyone can shed more light on replacing the studs with nuts on the stock manifold it I'd appreciate it.

subscribed

yes sir. it came out to be ALOT but id rather have OEM parts and feel safe than to be sorry later

Cheap + Fast = Unreliable
Reliable + Cheap = Not Fast
Fast + Reliable = Not Cheap

im not really sure what you are talking about with the manifold sorry.... but im sure someone can help you out {thumbup}

Update!

Brand new Exedy Twin Plate Clutch is going in this week as well as
FP Black
Ex Mani
Alarm
New tints
Tial QR BOV
Replace rear main seal and oil pan gasket
Serphine belt replaced
and full paint correction from GV Autosports!!{thumbup}{thumbup}{thumbup}

Here is an update.
Couple of teaser shots.{blob}
More shots and info to follow{thumbup}

Attachment 289005

Attachment 289006


Attachment 289007

Attachment 288847

Attachment 288848

Attachment 288849

Attachment 288850

Attachment 288851

Attachment 288852

Attachment 288853

http://i719.photobucket.com/albums/w...O/DSCN0037.jpg

Attachment 288854

Attachment 288855

Attachment 288856

Attachment 288857

Attachment 288858

Attachment 288859

http://i719.photobucket.com/albums/w...DSC_1668ps.jpg

Attachment 288860

Attachment 288861

{thumbup}
FPBlack setup has been installed but I still have couple things left over to be installed.
The car will be tuned by end of the weekend.
I will update the thread with some numbers :)

Very Nice!!{thumbup} Car is well put together and very clean! In for some Numbers after its tuned!{thumbup}

Very nice...what are the numbers already LOL.

Very nice man, setup looks good! Great choice on the Toxicfab manifold...I am using his manifold with my BBK-B...I also have his 02 dump and cam shield on my car. Who will be tuning the car? Hows the car running with the Tial Q & stock maf? I'm in NJ, we should meet up sometime man, I have some good friends that live in Philly...

Thanks i cant wait to get the car tuned!

LOL i know ive been working on the FPBlack upgrade since like November.

Thanks. Im trying to get Petey to tune my car. He is the hardest person to get hold of. I wanted to get the o2 dump but I heard it doesnt make that much difference performance wise so i just went with the ported 02 housing.
My car is running great with TialQR (not the Q) so far. I will find out after the tune for sure.
Is there any evo meets up in NJ? I cant seem to find anything EVO friendly around here in philly.

Ur in philly... But every week in edgewater.. They meet up! Usually a few hundred cars

Good choice with Petey, definitely knows his stuff. I know with his day job and tuning nights & weekends hes pretty ridiculously busy. Maybe trying calling Krazy House Customs directly and setup a tuning session with him. Ohhh, my mistake, in the pics I didn't see the bov recirculating so I thought you were running the Q. I just moved back up to NJ a year ago and there really hasn't been much going on but over the past couple months I've ran into a hand full of local evo guys to me. Now that the weather is getting better I'm gonna try and get together some mini meets. Ill let you know man...

Everything looks fantastic. That thing is going to fly.

The next time you pull off your bumper (or if you can access it from the engine bay) you should paint the upper intercooler bracket black to match the exterior of the car. Tiny details, I know. Best of luck with the rest of the build.

Oh really? Which day of the week and time? are you talking about edgewater in NJ? i dont mind cruising down one of these nice days

DEF hit me up. i started up a subaru meet at the art museum when i owned a subaru. RIght now all my friends are subaru guys :lol:
Id love to meet some EVO guys.
Ill be at the Sonic meet coming up next week. {thumbup}


GREAT idea!
Tiny details give the best results {thumbup}

My car has been tuned by Petey and I have the Dyno sheet. However, i left it in my car :lol:
I will scan it and post up later.
But here are quick cell phone pictures of the JMF catchcan installation and some stickers!{thumbup}

Attachment 288800
Attachment 288801
http://i719.photobucket.com/albums/w...424_181552.jpg
Attachment 288802

Attachment 288797
Attachment 288798



Here are the numbers.
PUMP GAS
379 Torque
436 WHP
On a Mustang dyno

Car was tuned at 28PSI. I couldve pushed more on it but its a DD not a race car.
I had it tuned by Petey at KHC.

Couple things about Petey and KHC

1. Awesome shop. super clean and they do wide variety of work.

2. Awesome, very friendly people and nasty cars. I saw Porsche p800, alpha 9 GTR, and a SMS challenger:eek:

3. Petey is very easy to work with. He is very very knowledgeable and pulled many runs to make sure my car is tuned right and took his time with it. He had no problem explaining all the stupid questions I had with the car

Overall, i cant be any happier with Petey and KHC. I will highly recommend them to anyone looking for a tune {thumbup}{thumbup}{thumbup}

Thanks Petey!

Couple pictures of my car at KHC

Attachment 288788
Attachment 288789
Attachment 288790
Attachment 288791
Attachment 288792
Attachment 288793
Attachment 288794
Attachment 288795
Attachment 288796

http://www.youtube.com/watch?v=hXWu3mIRo-8
http://www.youtube.com/watch?v=VZo7xI8DuQ0
http://www.youtube.com/watch?v=GtzP4XBWUBk

Those are killer pump gas numbers on that dyno. Congrats man!

Bro where did you get those stickers?? I likes.....

Great numbers !!! Awesome car !!! ;)

Nice dude! Does your exhaust have a resonator in it? It sounds extremely quite compared to the other ETS exhausts I have heard. Also is it a 3" or 3.5"?

Mikey

Thanks for the kind words! And the pictures look great! Your car was an absolute breeze to tune, and I can't tell you how much I appriciate that. I loaded up a V7 tune variation from my car and was almost dead on the very first pull. AFR's stay very tight from 24-28psi and I only stopped there because I know you are not trying to set any records. I am confident that is enough HP on our dyno to make a 10 second pass..Like I said, you can always do a racegas tune as your altmap:) Glad you are enjoying it...

Thanks!

Lets see
multiple websites.
http://www.coolstickersbro.com/store/
http://www.itsproper.com/
http://www.ihatestickers.com

thank you!

Really? it sounds pretty loud to me :lol: But then again i never got to compare it to another ETS owner or even a buschur bullet owner. yes it does have a resonator. Its 3.5inch. whatever the larger diameter one was.

Im glad my car kept you entertained :lol: thank you again for fitting me into your tight schedule and for your amazing work {thumbup}
Race gas.... yes.... once i have a DD 35 GTR i will go race gas {thumbup}

Nice build

Most all the ETS exhaust I have heard are louder than my car, for referance here is a vid of my car http://www.youtube.com/watch?v=41UxbnkcSeE

yea edgewater nj. Its held at the starbucks on river road. Its also the same parking lot as the barnes and noble, outback steakhouse, pathmark and mcdonalds. It starts at 8-8:30 ends whenever the cops say its time to go or when people get stupid!

^^^ oh... On thursdays

Hmmmm I can't really tell in the video. I really wanna hear that thing in person. But then again your Evo is pushing like 300 Ho more than mine :eek:
I will get o2 dump next time and it will be louder :D

Hmm maybe I will cruise down next thurs if it's nice out. I will be at sonic meet this Sunday. I hope to see you all there!

i finally had the time to paint and clear my headlights this weekend!
buffed it all out as well and painted the housing matt black. replaced my HID bulbs and fog lights as well as my indicator with a LED one.
I also took Jiggerman's advice and painte my FMIC bracket real quick {thumbup}

Attachment 288649
Attachment 288650
Attachment 288651

I also put some gold film goodies

Attachment 288652

well i got bored and decided to sticker bomb my fusebox cover lol
Attachment 288502

Pulling this up from a small hibernation...

Hope you're enjoying the new setup, seems like you are quite happy with it.
Of all the time I spent on that campus, I never once thought to use the SAE garage for my own use. I would always make due in the parking garage late at night. Your avenue is much more clever.

Glad you got to hook up with Petey, he is a hell of an individual and a great tuner to boot.
Concerning the Philly area activity, just poke your nose in the ne region for the Philly thread if you are looking for something to do. Those crazy cats always have something going on and its a great group of people.

just a note to myself for the record

water pump
alternator
timing belt
spark plugs

replaced

Car looks great man! Once you get the misfire & tranny issues solved...I want to see you throw some 100oct+ in there and let Petey retuned her...Next time you head to KHC let me know, Ill try and meet you down there...{thumbup}

Looking better everyday man! Is that one piece of gold film where you go around the center valve cover bolt?

thanks! i think i figured out the problem. i believe it was simply a spark plug issue. i got myself a new set its doing well so far

its one big piece and one smaller one to the left side
i actually have enough left oer piece for two additional valve covers. pm me if you are interested {thumbup}

nice man

Nice car dude petey tuned my car too even though i have issue's somewhere it still runs fine for months of beating on it and a few track days. Petey came out with a few cars to a private track rental a buddy of mine had we had a blast a definite cool dude and good tuner. Were you on 95 today and by princeton by any chance? I saw an evo that looked alot like yours, but i was not in my car so didnt want to make a scene..lol

Yea Petey is great. Hes extremely busy but still gets work done:lol:
I have actually moved out of PA and now living in NC lol. So that wasnt me you spotted earlier.

thanks to Matt at Spoolin
Awesome customer service. {thumbup}
Soon to be installed......

Attachment 286672
Attachment 286673
Attachment 286674
Attachment 286675

Installed Stoptech rotors today. my car stops Great {thumbup}
And I cant be any happier with spoolin COP. My car PULLS HARD now. i definitely feel the difference with idle, AFR, boost. Its well worth the price.

Attachment 286659
Attachment 286660Attachment 286661
Attachment 286662
Attachment 286663
Attachment 286664Attachment 286665
Attachment 286666

nice build... Keep it up man..

Attachment 286647
Attachment 286648
http://i719.photobucket.com/albums/w...O/DSC_0106.jpg
Attachment 286649
Attachment 286650
Attachment 286651
Attachment 286652
Attachment 286653

Stiff shifter bushings installed

Attachment 286640
Attachment 286641
Attachment 286642

great looking thread!

My contribution:

Attachment 286629
Attachment 286630
Attachment 286631Attachment 286632

:lol: