EvolutionM - Mitsubishi Lancer and Lancer Evolution Community - Its never too late to start a "build" thread right? :)

- Evo Show / Shine (https://www.evolutionm.net/forums/evo-show-shine-86/)

- - Its never too late to start a "build" thread right? :) (https://www.evolutionm.net/forums/evo-show-shine/537562-its-never-too-late-start-build-thread-right.html)

[quote=bnr34rb26dett;9159181]more packages. i like packages.

http://i719.photobucket.com/albums/w...314_150002.jpg

Nice car it looks sick and i had a ??? about your radio because i got the someone but have not yet installed it i wuz just wondering if you can post a video of your radio flipping open to see if you have any problems with that? just wanted to see before installing it but i really want to get a double din its had to find the kit for it do you might know?

Quote:

Originally Posted by bnr34rb26dett (Post 9267631)

Nice car it looks sick and i had a ??? about your radio because i got the someone but have not yet installed it i wuz just wondering if you can post a video of your radio flipping open to see if you have any problems with that? just wanted to see before installing it but i really want to get a double din its had to find the kit for it do you might know?

ur car looks amazing with these rims and wingless!

Awesome looking car, and awesome build. I'm sure that it was a lot of work but you have one of the nicest builds that I have seen.

Dan (drb)

The interior looks like an airplane cockpit with all those gauges, lol.

Quote:

Originally Posted by PrimerSdime (Post 9702582)

The interior looks like an airplane cockpit with all those gauges, lol.

thanks
but it is an airplane...... without the wing:lol:

this thread owes me new pants

can't wait to see some video clips of that o2 dump! Where are you gonna get it retuned?

Awesome thread. Car is coming along nicely! {thumbup}

Attachment 286073
Virtual Dyno graph before the O2 dump install
Not the best graph, but it should give you an idea..

Quote:

Originally Posted by scheides (Post 7712839)

So you run 96530706 and literally just did:

Code:

<table name="Rear O2 Heater Patch" category="Mods" address="2c62a" type="1D" scaling="Hex16" />

and changed "4A0B" to "0009" and that's it? I shall give this a try.

**edit** I tried it, it seems to work great! I have the rear o2 completely unplugged. I'll make sure nothing silly becomes of it over the next week but all seems fine for now.

i will be giving this a try so that i can finally install my Trust Ti

Read the whole thing, this car is awesome! Keep the good work up! I know the dude with the red WRX, you live in Philly too?

Quote:

Originally Posted by R3VOLUTION (Post 9766075)

Read the whole thing, this car is awesome! Keep the good work up! I know the dude with the red WRX, you live in Philly too?

yea i went to school with him. lived in philly until september. im all over the place now haha :lol:

Attachment 285848

black friday bling bling lol

invidia test pipe
mishimoto radiator shroud
AEM digital boost gauge 35psi (my prosport only reads up to 30)
HKS oil cap

Send me all your left over/removed bits :D My car is only doing 0.5 bar at the moment. So if I steal all your bits i can diagnose :P

That is an awesome build thread.. The Takata Green wheels look awesome.. you might need to change your seat belt harness to match.. which look sick .. Keep it up and I will stay tuned..

Quote:

Originally Posted by Jush (Post 9786034)

Send me all your left over/removed bits :D My car is only doing 0.5 bar at the moment. So if I steal all your bits i can diagnose :P

i already have prosport gauges installed. im just replacing it with this one so i can read 30+ psi :lol:

Quote:

Originally Posted by Lyzek01 (Post 9786141)

That is an awesome build thread.. The Takata Green wheels look awesome.. you might need to change your seat belt harness to match.. which look sick .. Keep it up and I will stay tuned..

good idea! i dont like the flashy seat belts tho...

Well it was nice out here in the south. so i decided to detail under my car for once. Being that it came from PA, there was a little bit of rust under the car. every bit of it was dremeled off and painted over with 3m undercoat spray paint. {thumbup}
Pictures from work in progress

You can also see my dump tube finally. Its doing well so far.

I have also done full detailing of my car. wash, clay bar, polish, wax. spent 12hrs just detailing:lol:

http://i719.photobucket.com/albums/w...O/0cc49a6a.jpg
Attachment 285714
Attachment 285715
Attachment 285716
Attachment 285717
Attachment 285718
Attachment 285719
Attachment 285720
Attachment 285721
Attachment 285722
Attachment 285723
Attachment 285724
Attachment 285725
Attachment 285726
Attachment 285727
Attachment 285728
Attachment 285729

Also,

JDM bumper is on its way from Driveline (FINALLY!):lol::lol::lol:

This car is the sex! Nice build!

Quote:

Originally Posted by ca18hatch24 (Post 9816607)

This car is the sex! Nice build!

thanks!

Quote:

Originally Posted by MitsuJoe

Is your downpipe to O2 housing missing a bolt?

Also whats up with the ZIP ties around the center exhaust hanger?

Also did you paint the rear tow hook red? :)

Joe

Yes its missing a bolt. it broke off when i was installing the o2 dump. i have a new OEM dp bolt coming in the mail.

Rear exhaust hanger is zip tied to bring down my JDM exhaust thats currently fitted on my USDM bumper (JDM exhaust was hitting my USDM bumper) I have my JDM bumper coming in the mail right onw

Yep, rear tow hook has been painted red. i should be able to see this with JDM rear {thumbup}

Nice thread indeed!!! Keep it up! And go get more go karting vids!

Nice car and build! I live on the boarder of Troy here in MI. We'll have to meet up some time..

Quote:

Originally Posted by sabrinaEvo (Post 9826534)

Nice thread indeed!!! Keep it up! And go get more go karting vids!

haha thanks:lol:

Quote:

Originally Posted by badev0 (Post 9827376)

Nice car and build! I live on the boarder of Troy here in MI. We'll have to meet up some time..

yes sir! we definitely will {thumbup}

Update coming soon on JDM Bumper {thumbup}

where did you get arm rest cover?

Quote:

Originally Posted by blw6989 (Post 9829422)

where did you get arm rest cover?

i got it here on evom used.

You are probably all aware of the little incident i had in WV on ice
Well here is the aftermath.
Not bad at all. It couldve been so much worse.
Lip, caliper, and a rim got heavily scratched
Fender, sideskirt, doors got lightly scratched.
But thats ok because the Voltex kit is on its way :)

http://i719.photobucket.com/albums/w...t/IMAG0818.jpg
http://i719.photobucket.com/albums/w...t/IMAG0817.jpg
http://i719.photobucket.com/albums/w...t/IMAG0816.jpg
http://i719.photobucket.com/albums/w...t/IMAG0827.jpg
http://i719.photobucket.com/albums/w...t/IMAG0824.jpg
http://i719.photobucket.com/albums/w...t/IMAG0823.jpg
http://i719.photobucket.com/albums/w...t/IMAG0821.jpg

You might check the driver's front control arms. I don't if its the negative space from the absent or misaligned body work or if you've got a little positive camber going on with that front wheel...but it looks a little off.

Quote:

Originally Posted by DeatschWerks (Post 9902300)

:lol:
i got an alignment done. i cant recall off top of my head but it was slightly off. Nothing ridiculous tho

lol at all the youtube comments

Just read through all 10 pages! Great effin build man! Love the takata green with the tarmac black. pure sex! keep it up!

very nice!!! bumper looks great.

APPROVED! can't wait to see it painted and mounted!!

Subscribed nice build man cant wait to see how that kit fits and how much sand ect needs to be done

Spent a little time test fitting the voltex over the weekend. it fits very well. Front bumper is a tight fit and could use some trimming by the headlights
side skirts fit perfect. but trimming would be needed up front where front wheels come in contact with the skirts

Attachment 284753
Attachment 284754
Attachment 284755
Attachment 284756
http://i719.photobucket.com/albums/w...O/5e528bb8.jpg
Attachment 284757
Attachment 284758
Attachment 284759
Attachment 284760

Badev0's Evo. Making 629AWHP

Attachment 284761
http://i719.photobucket.com/albums/w...O/3997fbaf.jpg
http://i719.photobucket.com/albums/w...O/486754f8.jpg

Looking good man, this summer is going to be fun:)

Looking good! That black 600hp Evo looks familiar ;)

I need to buy a wide angle lens now.

Quote:

Originally Posted by badev0 (Post 9980990)

Looking good! That black 600hp Evo looks familiar ;)

I need to buy a wide angle lens now.

:lol::lol::lol:

How is the fitment for the front fender?

Wow! Coming along nicely.

Dibs on the FMIC haha

Very nice build keep up the great work!

Nice build. Sub'd. I LOVE your stickers for the passenger! LOL. I've had many friends that been in my car with all kinds of priceless reactions when they were on the passenger seat... some whines like a b!tch (grown man), some just held their breathe and not say a word. One chick almost wet herself, she was on the passenger seat when I was doing 150+ mph. :lol:

Evo party at Scotts! haha

I can't wait to bring mine back out and actually enjoy a summer with it.

Awesome parts, can't wait for the installs...

Rear Wiper has been removed
and im rocking a evo 8 bumper while voltex gets painted

Attachment 284553
Attachment 284554
Attachment 284555

Totally awesome! Keep it up!

Nice its coming along nicely!

FIC 2150 injectors arrived

Attachment 284513

Much needed TBolt clamps

Attachment 284514

QTP Test pipe electric cutout

Attachment 284515

{thumbup}

Car is coming along great !!! Much props to you.

awsome! how are u liking them and what spring rates did u go with?

he posted 8/9 swift springs upgrade above.

Quote:

Originally Posted by sujinX (Post 10045840)

he posted 8/9 swift springs upgrade above.

must have missed them:) thx!

can't wait to see the new wheels n this car thanx.

I'm a sucker for Volks.

Quote:

Originally Posted by SmurfZilla (Post 10134710)

I'm a sucker for Volks.

my first set of real wheels :lol:
im excited to put them on{thumbup}

Quote:

Originally Posted by bnr34rb26dett (Post 10138256)

my first set of real wheels :lol:
im excited to put them on{thumbup}

I am too!! mostly because i get your old wheels :lol:

What are the specs of the volks? I think I have the same specs but LE28s.

Quote:

Originally Posted by FLOW1 (Post 10139374)

What are the specs of the volks? I think I have the same specs but LE28s.

18x 9 Takata Green (Original) Volk Ce28s
255/35/18 Yokohama Sline

Installing Buschur Race FMIC {thumbup}

Attachment 283121
Attachment 283122
Attachment 283123

Awesome build and thread sir. Thanks for the entertainment.

Say do you got yourself a green oil cooler there son?

What was up with Sal's car?

Quote:

Originally Posted by MitsuJoe (Post 10154407)

Say do you got yourself a green oil cooler there son?

What was up with Sal's car?

lol yea i got bored while i was waiting for extra parts for the car :lol:
he blew a heater core hose. no big deal.
i still gotta meet you mitsujoe, i will be at gingerman 5/25

Attachment 282952
Attachment 282953
Attachment 282954

a little update on voltex kit ;)

I just browsed this thread so I didn't read all the information but..

Are you going to stay wingless? If not, any idea which wing to go with? Are you keeping full interior? Adding a front splitter?
DD'ing a voltex'd 600+hp evo is an awesome idea. Never heard that before but {thumbup} for originality!

Quote:

Originally Posted by EVOeroc (Post 10171566)

I have the V5 wing ready to be installed. also the voltex diffuser.
i already dont have rear seats but i do plan on keeping my interior. no splitter.
i actually have a DD now. B6 A4 :) and 650 project might be canceled. i may stick around 550 awhp since im not building a drag car or anything like that.

Attachment 282891
Attachment 282892

more voltex goodies update

yes the voltex rear spoiler!

Looks great, man!

It's a shame...I just sold a TB Voltex kit a few months ago and didn't even bother to throw it up on here. Could've saved you some coin.

Quote:

Originally Posted by VR4_EVO_IV (Post 10175347)

yes the voltex rear spoiler!

MOAR VOLTEX {blob}{blob}{blob}

Quote:

Originally Posted by Blue91lx (Post 10175400)

Looks great, man!

It's a shame...I just sold a TB Voltex kit a few months ago and didn't even bother to throw it up on here. Could've saved you some coin.

oh wow, i would have bought those from you 100%

Where is the paint work getting done?

Looks good so far!

Looking good man. I'm excited to see it with the Volks on it. Ready to sell this beast yet? haha

Are these version select kit or real voltex?

Quote:

Originally Posted by MitsuJoe (Post 10182071)

Where is the paint work getting done?

Looks good so far!

at a friends shop in south haven

Quote:

Originally Posted by antwon6420 (Post 10182428)

Looking good man. I'm excited to see it with the Volks on it. Ready to sell this beast yet? haha

haha maybe in a few years when i buy a GTR :)

Quote:

Originally Posted by rhd-jon (Post 10188855)

nice

thanks!

Quote:

Originally Posted by JGUEVO (Post 10189097)

Are these version select kit or real voltex?

Yep! i didnt like the air vents on the voltex bumper lip. it was a bit ricy to me.:lol: