2 Attachment(s)
Decided to do the timing belt and gasket just to be on the safe side ;) Here is the OEM parts and part numbers for what you need. (I am getting gates timing belt and MAP headstuds) MIT-1540A019 Intake Manifold Gasket : Mitsubishi Lancer EVO VIII & IX MIT-MD372536 OEM Camshaft Oil Seal: Mitsubishi Lancer EVO VIII & IX MIT-MD329503 OEM Timing Postion Sensor Gasket (Cam Angle Sensor): Mitsubishi Lancer EVO VIII & IX MIT-MN137262 OEM Water Pump Gasket: Mitsubishi Lancer EVO VIII & IX MIT-MD369999 OEM Timing Belt Tensioner Pulley : Mitsubishi Lancer EVO VIII & IX MIT-MD156604 OEM Timing Belt Idler Pulley : Mitsubishi Lancer EVO VIII & IX Attachment 274816 Attachment 274817 |
3 Attachment(s)
Attachment 274757
Attachment 274758 Found a little oil residue while working. I decided to pull the head off and resurface the head Attachment 274759 This simple job is turning into a full rebuild lol |
4 Attachment(s)
A little update.
Decided to get a brand new Koyo Rad :) Attachment 273862 My 18x9.5 Nt03's powder coated Bronze (took 2 months to arrive from Enkei due to popular size. and powder coating took about another month :/). G etting 275/35/18s fitted and balanced. Attachment 273863 http://i719.photobucket.com/albums/w...psqhcrrgsj.jpg Cleaning. Car is back on the road (I need to do the evo dave fender mod to fit the new wheels) Attachment 273864 Attachment 273865 |
Oh man, I love the NT03s. There is something just so sexy. I don't believe they're much heavier than the RPF1s, but much better looking IMO. Great job sticking out the build this long and maintaining such a long going build thread. Best of luck.
|
clean car man, well done. I just moved to the (detroit) area, spun a bearing and threw a rod. i am looking to replace my short block and go built again. i need help choosing a shop and sourcing parts and assistance. as well as tuning after the build. my build thread : https://www.evolutionm.net/forums/pr...ld-thread.html
|
In the Video. Your rear view mirror? Does that have a backup camera built in?? were did u get that?
|
damn those nt03's look sick!
|
Nt03s definitely look good in bronze!
|
Originally Posted by OkinawaFD3S
(Post 11307425)
Oh man, I love the NT03s. There is something just so sexy. I don't believe they're much heavier than the RPF1s, but much better looking IMO. Great job sticking out the build this long and maintaining such a long going build thread. Best of luck.
Originally Posted by USCGSAM
(Post 11339701)
clean car man, well done. I just moved to the (detroit) area, spun a bearing and threw a rod. i am looking to replace my short block and go built again. i need help choosing a shop and sourcing parts and assistance. as well as tuning after the build. my build thread : https://www.evolutionm.net/forums/pr...ld-thread.html
Originally Posted by polish_pounder
(Post 11344637)
In the Video. Your rear view mirror? Does that have a backup camera built in?? were did u get that?
Originally Posted by kyddo112
(Post 11344695)
damn those nt03's look sick!
Originally Posted by tsidrift1
(Post 11348825)
Nt03s definitely look good in bronze!
Sorry for the late reply guys, i stopped getting email responses on this thread for some reason. |
Please post the link when you do the video review! im very interested.
|
Originally Posted by polish_pounder
(Post 11357367)
Please post the link when you do the video review! im very interested.
|
You're everywhere man. Found your YouTube videos before I even got my evo. Very enticing. Gorgeous build. Love the NT03s.
|
Originally Posted by mps606
(Post 11362586)
You're everywhere man. Found your YouTube videos before I even got my evo. Very enticing. Gorgeous build. Love the NT03s.
|
nice build
Nice thread and good looking build. Those NT01in bronze look great on your black car.
I think I met you last summer at Waterford racetrack. I had the white Evo 9 with the Varis bits. Good to hear your car is back on the road. Is there a shop you recommend for installs in SE MI? |
great job! nice thread!
|
Originally Posted by bnr34rb26dett
(Post 10362386)
http://i719.photobucket.com/albums/w...O/f1630e11.jpg
http://i719.photobucket.com/albums/w...O/c36e9764.jpg http://i719.photobucket.com/albums/w...O/2138dcf4.jpg http://i719.photobucket.com/albums/w...O/9dd94eed.jpg http://i719.photobucket.com/albums/w...O/ce93a54a.jpg http://i719.photobucket.com/albums/w...O/9cf73ee4.jpg Brand new Buschwacker transmission in! |
Originally Posted by bnr34rb26dett
(Post 10362386)
http://i719.photobucket.com/albums/w...O/f1630e11.jpg
http://i719.photobucket.com/albums/w...O/c36e9764.jpg http://i719.photobucket.com/albums/w...O/2138dcf4.jpg http://i719.photobucket.com/albums/w...O/9dd94eed.jpg http://i719.photobucket.com/albums/w...O/ce93a54a.jpg http://i719.photobucket.com/albums/w...O/9cf73ee4.jpg Brand new Buschwacker transmission in!
Originally Posted by bnr34rb26dett
(Post 11169290)
New setup for this year!
275 35 18 on enkei nt03 18x9.5 +27 http://i719.photobucket.com/albums/w...pskm0jjtay.jpg I have the Rota Grid 18x9.5 e20 with 255-35-18 nangkang. I rolled my rear and its not scratch my rear fender but it srcatches the bolt that hold the rear bumper to the quarter panel. I wonder if u have any advice as to solve this problem. Or do a youtube vids about this matter. Im pretty sure alot of people go thru this problem with wider tires. I do have the D2 coilover and set it at its hardest already. Thanks |
Originally Posted by Howulikemyevo
(Post 11381086)
How do u fit your tires on your rear fender without scratch your rear bumper bolts.
I have the Rota Grid 18x9.5 e20 with 255-35-18 nangkang. I rolled my rear and its not scratch my rear fender but it srcatches the bolt that hold the rear bumper to the quarter panel. I wonder if u have any advice as to solve this problem. Or do a youtube vids about this matter. Im pretty sure alot of people go thru this problem with wider tires. I do have the D2 coilover and set it at its hardest already. Thanks |
Originally Posted by bnr34rb26dett
(Post 11382022)
i actually havent installed the wheels yet. its been just sitting in my garage.. ill let you know how it works out. i know some people relocate the bolt from stock lcoation to the rear of the bumper for this reason.
Thanks |
Originally Posted by Thrilla
(Post 11365692)
Nice thread and good looking build. Those NT01in bronze look great on your black car.
I think I met you last summer at Waterford racetrack. I had the white Evo 9 with the Varis bits. Good to hear your car is back on the road. Is there a shop you recommend for installs in SE MI? |
5 Attachment(s)
Attachment 273349
Attachment 273350 Attachment 273351Attachment 273352Attachment 273353 JMFab hood dump installed ;) |
4 Attachment(s)
|
sweet build. you should post before and after pics of your garage, saw the vid on youtube a while ago along with all your other vids. keep it up.
|
7 Attachment(s)
Originally Posted by Boooostelo
(Post 11399143)
sweet build. you should post before and after pics of your garage, saw the vid on youtube a while ago along with all your other vids. keep it up.
it looks like this :) Attachment 273309 Attachment 273310 Attachment 273311 Attachment 273312 Attachment 273313Attachment 273314Attachment 273315[/QUOTE]
Originally Posted by BNR34RB26DETT
(Post 1724801)
http://i719.photobucket.com/albums/w...psts3vtg1r.jpghttp://i719.photobucket.com/albums/w...psoedq2grk.jpghttp://i719.photobucket.com/albums/w...pshqiesxcy.jpg
http://i719.photobucket.com/albums/w...psarlo0cr2.jpghttp://i719.photobucket.com/albums/w...ps1ljzrrkj.jpg http://i719.photobucket.com/albums/w...pslcmdk3ov.jpghttp://i719.photobucket.com/albums/w...ps3vin33gd.jpg |
|
great build! i really like the black/green theme
|
|
great build just read ever page and watch a few of your youtube videos yesterday
|
Originally Posted by sonicteam120
(Post 11415459)
great build just read ever page and watch a few of your youtube videos yesterday
|
Awesome dump pipe haha...can't wait for the video
|
double thumbs up!
|
Nice vids brotha!
|
4 Attachment(s)
|
1 Attachment(s)
Test fitting the 275 35 18 nt03s
Attachment 273111 |
Originally Posted by bnr34rb26dett
(Post 11430527)
Test fitting the 275 35 18 nt03s
http://i719.photobucket.com/albums/w...psg7mdd79p.png I only have 255-35-18 and it rubs a little bit when I hit a dips on the highway. If u ever do a rear bumper bolts relocation, then do some video on it so I know how to do mine too ok! |
Originally Posted by Howulikemyevo
(Post 11430592)
Does your rear bumper bolts rubs the tires?
I only have 255-35-18 and it rubs a little bit when I hit a dips on the highway. If u ever do a rear bumper bolts relocation, then do some video on it so I know how to do mine too ok! |
New wheels look so fresh...
|
1 Attachment(s)
bent a valve....
decided to freshen up the motor with all new valves and valve stems all around. head build #2 within a year lol Attachment 272751 |
You have one of the nicest evos i have ever seen! I watch all ur YouTube vids dude and ur car is insane. It's nice to see people who truly love evos continues to make their cars even better. I'm in the middle of tearing my motor and tranny out. I wanna get in the 700hp range when everything is said and done.
|
man just read the entire thread! what caused the bent valve? your motor is LR? i'm building a similar setup. good luck!
|
Originally Posted by amsevokid
(Post 11488765)
You have one of the nicest evos i have ever seen! I watch all ur YouTube vids dude and ur car is insane. It's nice to see people who truly love evos continues to make their cars even better. I'm in the middle of tearing my motor and tranny out. I wanna get in the 700hp range when everything is said and done.
Originally Posted by nadevo
(Post 11491601)
man just read the entire thread! what caused the bent valve? your motor is LR? i'm building a similar setup. good luck!
|
|
|
|
|
|
|
|
Originally Posted by bnr34rb26dett
(Post 9042655)
So my evo is pretty much built already so i should really call this a MOD thread, which has been turning into a picture thread since i just bought my first DSLR:lol:
i hope my mod list will help those who are looking to go fp black or something similar Or make you drool for those who are still stock My goal is street driven 650AWHP Voltexed out evo. This thread will be picture heavy {thumbup} Motor swap was done by AWD Motorsports Tuned by Petey at KHC{thumbup} Motor Built Buschur 2.0 Buschur Stage 3 Head Ported FP Black - Custom BR dual stainless steel valve springs - BR titanium retainers - New Valve Seals - BR stainless 1 mm over intake valves - BR stainless 1 mm over exhaust valves - Stainless Oring around each combustion chamber - Complete port & polish job - Stainless Steel O-Ring Crower Rods Je Pistons L19 Arp Headstuds / Main studs Buschur BF 272 Cams Buschur Race Core FMIC Buschur Race LICP Buschur UICP Buschur 65MM Ported Throttle Body Buschur Ported Intake Manifold Buschur Balance Shaft Eliminator Buschur inline MBC Buschur Short Ram intake AWD Motorsports Billet Motor Mount Kit PTE 1000cc Injectors NGK BPR8ES spark plugs SpoolinUp COP Walbro 255 Fuel Pump Tial QR BOV JMF Catch Can STM Oil Cooler Kit Koyo Radiator Toxic Fab Exhaust Manifold Toxic Fab Cam angle sensor shield 2G/Evo Oem Exhaust Manifold Stud and Nut Kit Perrin Heatwrapped DP Coated JMF O2 Hood Dump QTP Electric Cutout Test Pipe Trust Ti Catback Exhaust Taylor Battery Relocation Zaklee Evo 8 Clear Cam Cover Evo VII-IX Samco Coolant Hoses HKS Oil Cap Greddy 1.3 Bar Radiator Cap Mishimoto Evo Air Diversion Plate Matte Silver STM Evo VIII-IX Polished Radiator Brackets Oil AMSOIL AMOQT-EA 10W40 (Engine Oil) Transaxle Gear Lube 75W-90 MTGQT-EA (Transmission) Red Line 58104 80W140 (T- Case/ Rear Diff) Transmission/ Suspension Buschur's Buschwacker Transmission Buschur Racing Evo Shifter Bushings (5-Speed) Torque Solution Shifter Base Bushing Kit Exedy Twin HD Clutch Buschur Short Shifter STM Clutch Fork Stop Rear diff restacked and rebuilt Whiteline Rear Control Arm Bushing- lower inner W62951 Whiteline Rear Control Arm Bushing- lower outer W62950 Whiteline Rear Control Arm Bushing- lower shock W32958 Whiteline Rear Diff Mount Bushings Whiteline Rear Trailing Arm Bushings Perrin adjustable rear sway bar AP Adjustable rear end links Fortune Auto 500 8/9 w/ Swift Spring Upgrade/ Roller Bearing Upgrade EBC red stuff StopTech Slotted Front/Rear Rotors ATE Super Blue Techna-Fit SS Brake Lines ARP extended wheel studs Limited Edition 18x 9 Takata Green Volk Ce28s 255/35/18 Yokohama Sline Muteki SR48 Lug Nuts Interrior MR Center Console Radio Relocation Kit Kenwood KVT-514 DVD player AEM Wideband AEM Digital Boost Gauge Prosport Halo Gauges (Oil P/ Oil T/ Fuel P) Escort 9500ix/ Garmin 765 Hardwired ATI EPOD 52mm Super Bright LEDS Dome/Trunk/Indicator lights Rallye 3 ASM Schroth racing harnesses Bride Armrest Cover Binary Engineering Seat Lowering Brackets Bosch Icon Wiper Blades Exterior JDM tail lights JDM Rear Bumper JDM Rear Crash Beam Voltex Rear Diffuser Voltex Side Skirts Voltex Front Bumper Voltex Front Canards Cleared and Blacked Out Headlights Hella Horns (Green) Rexpeed Vortex Generator Hood Damper JDM Amber Turn Signals NOKYA H11 Yellow Fog light bulbs Rexpeed Polarized Mirrors Revised Heater control knob fix mod From this http://i719.photobucket.com/albums/w...dett/EVO/9.jpg to These (current look) http://i719.photobucket.com/albums/w...ps2c2ec048.jpg Voltex Evo Build In Progress Cinematography - YouTube Pulls in Crazy 500 WHP EVO Open Dump/Cut Out - YouTube Deadly Highway Black Ice Pile Up Accident - YouTube |
Saw that you are running the techna-fit SS brake lines. Are you still running them? If so, How do you like them and do they install back to all factory mounting points?
|
New gauges installed! |
Originally Posted by zenki-s13
(Post 11554932)
Saw that you are running the techna-fit SS brake lines. Are you still running them? If so, How do you like them and do they install back to all factory mounting points?
|
|
Some of the things i have been busy with ;) |
https://farm8.staticflickr.com/7512/...744930df_b.jpgCars and Coffee Indianapolis by Jon Tuazon, on Flickr
https://farm8.staticflickr.com/7725/...b8def159_b.jpgCars and Coffee Indianapolis by Jon Tuazon, on Flickr https://farm8.staticflickr.com/7456/...97f4f8cc_b.jpgCars and Coffee Indianapolis by Jon Tuazon, on Flickr |
Had sometime to catch up with a good buddy of mine, you guys know him as CZeroMedia. Of course we did go around the city with the daily but with the EVO. I havn't seen the EVO up and running for about 5 years LOL basically after he got it and then we parted ways. But i'm sure you guys know about his struggles through his Youtube videos haha.
Check out a little hooning complication I put together from footage I took over the weekend we hung out. Feel free to share, if you share please hashtag #epicjontuazon Subscribe ► http://www.youtube.com/epicjontuazon Facebook ► http://facebook.com/epicjontuazon Instagram ► https://instagram.com/epicjontuazon EpicJonTuazon ► http://epicjontuazon.com And Problems ordering food in the EVO |
i just read through this whole thing...bored at home on a sunday...this was really entertaining and educational...i too work on my own car so it was fun watching the videos and seeing how everyone has different techniques/processes to do things...awesome car and hope you keep enjoying this thing and making videos...thx for the read man...:p...
|
Originally Posted by nor11384
(Post 11619398)
i just read through this whole thing...bored at home on a sunday...this was really entertaining and educational...i too work on my own car so it was fun watching the videos and seeing how everyone has different techniques/processes to do things...awesome car and hope you keep enjoying this thing and making videos...thx for the read man...:p...
|
np man
|
|
are you still around Michigan ? if so how is the EVO scene out here ? I am a military transplant to the area.
|
Originally Posted by USCGSAM
(Post 11687816)
are you still around Michigan ? if so how is the EVO scene out here ? I am a military transplant to the area.
|
Originally Posted by bnr34rb26dett
(Post 11689597)
yeah man. hit me up on social media czeromedia
not to sound creepy but I have been following you on youtube and IG for a while now. the 30k$ into my evo video made me feel better about the roughly 30k I have into mine. I should be getting mine back from boostin in Chicago here soon. |
Originally Posted by USCGSAM
(Post 11689720)
not to sound creepy but I have been following you on youtube and IG for a while now. the 30k$ into my evo video made me feel better about the roughly 30k I have into mine. I should be getting mine back from boostin in Chicago here soon.
i should be hosting a meet sometime once it gets warmer. i will def keep people up to date on events and whatnot |
The only bad part about dumping 30k into an Evo is all the times you bend your new radiator fins, scratch your new valve cover, and develop new creaks and rattles in the dash and heatshields making it seem like a ****box, despite how much you actually love it.
|
Originally Posted by Name User
(Post 11691360)
The only bad part about dumping 30k into an Evo is all the times you bend your new radiator fins, scratch your new valve cover, and develop new creaks and rattles in the dash and heatshields making it seem like a ****box, despite how much you actually love it.
|
Keep up the good work!
|
I decided to install a side exit lol
:D |
this is amazing, what is the ball park price from F&S .... might be interested.
|
Originally Posted by USCGSAM
(Post 11747904)
this is amazing, what is the ball park price from F&S .... might be interested.
|
|
Love the build and enjoy your videos. Good luck with the fd build!
|
This thing is way rad!
|
All times are GMT -7. The time now is 08:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands