can someone tell me which off set will give me more room for bbks(endless).

im going to get a set of bbs lm's and want 18x10. the two offsets offered are 20 and 25. now im going to run 265/35 advan 48's. rubbing in not an issue because i have hrs front and rear fenders.

my only worries are how much of a spacer might i need in the front to fit the endless brakes?

 

I think you might have already answered your own question.. get the bbk first, try the wheels (+20) and see if you need spacers or not. im sure 5mm or 10mm would work if +20 offset won't fit. But I am fairly certian it will fit without spacers.

I have a set of 18x10.5 +15 waiting to be put on right now.. a lot of clearance between wheel and caliper.

 

nice bro what color?im looking on the japan bbs site and dont see those spec on there site.

so the lower offset the more room for brakes?

 

nothing to crazy.. bronze se37k from r33/34 gtr. basically same offset setup as the cyberevo.

Yes, lower the offset the more clearance will be for the brake calipers.

since you have wide fenders (f & r), 18x10 +20 r33/34 gtr application is a good start since you are upgrading to a set of bbk.

Here is the link to the r33/34 gtr applications:

http://www.bbs-japan.co.jp/appli/appli_i12.html

very nice choice of wheels you are getting. balla status!

 

Not always true. Depends a lot on spoke design and face .....

for example if you look at any Volk catalog you will see different configs and offsets that say face 1 or face 2 . Usually face 2 is flat and will give less clearance and face 1 is curved. As the spokes bow out then there is more room for the caliper.

^ I hope all that makes sense as I can pic in my head but dont know how to exactly explain it.