I'm in desperate need of some help.

Long story short beer + suspension work + big hammer = bad.

I screwed up 4 ball joints and boots on the rear trailing arm and rear assist arm.

http://www.justchil.net/gallery2/d/83090-4/100_3397.JPG

http://www.justchil.net/gallery2/d/83095-4/100_3398.JPG

I can't find a solid answer although I have found some useful info.

Can these be replaced without ordering new arms? If so does anyone know a company that can do this for me along with pressing in new bushings? I'd be willing to pay a little extra for quick turn around on this.

If these can't be replace (i'm screwed) does anyone have any of these with perfect ball joints they would want to sell? I don't care about the condition of the bushings in the other end... that's why I took these off to start with.

PS: I did find a thread that was pretty old that said the rear trailing arm would have to be totally replaced... not sure if this would still apply... hopefully not.

 

a pickle fork would have been nice. unless something new happend with Mitsu. your gonna need to replace the entire thing. Let me know what arms you need, I happen to have some laying around that are extras that I never needed.

 

I was afraid of that. I would need both assist arms and trailing arms. Check the first pic just to be sure I'm telling you the right things lol

 

Bump.

Let me know as soon as you can bro If you do have both of these can you guys press in new bushings? I could send them to you and buy the ones I still need from ya.

 

pm'ed ya.