Notices
Evo Tires / Wheels / Brakes / Suspension Discuss everything that helps make your car start and stop to the best of it's abilities.

Post RSB install problems

Old Jan 31, 2011 | 10:33 AM
  #1  
Camrymatic's Avatar
Thread Starter
Newbie
iTrader: (16)
 
Joined: Nov 2009
Posts: 92
Likes: 0
From: Florida
Post RSB install problems

I had a Whiteline RSB and Bump Steer Correction Kit professionally installed.
My suspension is other wise stock.

After getting on the highway i started to feel the tail wandering like i had a trailer attached and it was catching wind. Every time i would move the steering wheel i could feel the tail wonder back and forth for a few seconds.

My installer told me i need to get an alignment done.
I am going to go with Camber -2/-1.5 Toe 0/ -1/16.

Do you guys think that should fix it?
Also, to get the front camber out to -2 i have to reverse the front camber bolt correct?

Thanks
Reply
Old Jan 31, 2011 | 10:57 AM
  #2  
GTWORX.com's Avatar
Former Sponsor
iTrader: (35)
 
Joined: May 2004
Posts: 3,583
Likes: 6
From: Columbia, Maryland
Yes, get an alignment ASAP.

The specs you posted are good. You'll reverse the front camber bolt.

- Andrew
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:55 PM.