Wheel advice
#1
Wheel advice
http://m.ebay.com/itm/17-17x9-5x114-...%257Ciid%253A2
Those are the wheels I'm looking at.
I'm needing a set of wheels to DAILY.
Looking at the spokes I don't think I'll have caliper clearance issues, I'm more concerned of the barrel of the wheel clearing the brake assembly. Any thoughts on this?
Those are the wheels I'm looking at.
I'm needing a set of wheels to DAILY.
Looking at the spokes I don't think I'll have caliper clearance issues, I'm more concerned of the barrel of the wheel clearing the brake assembly. Any thoughts on this?
Last edited by GSX_TO_EVO; Aug 3, 2017 at 07:13 PM.
#2
EvoM Staff Alumni
iTrader: (3)
I would be more concerned about the spokes clearing. You really need concave spokes to clear the Brembos. Not sure those spokes have enough sweep to them
As a reference, I run Rota P45R 17x9.5 +30 & the Advan RGII 17x9 +29 & they clear w/out spacers
#3
Should have no problem w/the barrel of the wheel clearing. I too run 17's & that is usually a non issue wtih the standard Brembos. Now, running a 6 pot caliper, that could be a prob.
I would be more concerned about the spokes clearing. You really need concave spokes to clear the Brembos. Not sure those spokes have enough sweep to them
As a reference, I run Rota P45R 17x9.5 +30 & the Advan RGII 17x9 +29 & they clear w/out spacers
I would be more concerned about the spokes clearing. You really need concave spokes to clear the Brembos. Not sure those spokes have enough sweep to them
As a reference, I run Rota P45R 17x9.5 +30 & the Advan RGII 17x9 +29 & they clear w/out spacers
It looks pretty concave to me.
I would love to have a set of RG2s in 17x9 +29. Maybe one day after the rebuild is done I'll find a set.
#7
EvoM Staff Alumni
iTrader: (3)
This thread wont help too much, but another member brought these up to us a few months back
https://www.evolutionm.net/forums/ev...35-offset.html
https://www.evolutionm.net/forums/ev...35-offset.html
Trending Topics
#8
This thread wont help too much, but another member brought these up to us a few months back
https://www.evolutionm.net/forums/ev...35-offset.html
https://www.evolutionm.net/forums/ev...35-offset.html
I just don't want to shell out any more money than need be for wheels I know are gonna get destroyed.
I've been eyeballing the 17x9 +25 Konig Hypergram also, just not sure if I want to run the 25 offset.
Car is lowered with Tein top hats, bilstein b8s and swift spec rs. So I'm afraid the 25 is going to stick out a little much. Plans are no bigger than a 255/40/17 all fenders lips are rolled.
#9
This thread wont help too much, but another member brought these up to us a few months back
https://www.evolutionm.net/forums/ev...35-offset.html
https://www.evolutionm.net/forums/ev...35-offset.html
http://m.ebay.com/itm/17x9-JNC-006-5...%257Ciid%253A9
#10
EvoM Staff Alumni
iTrader: (3)
^^^ I like the look, but I doubt they will fit over the front Brembos / Spec shows 17x9 +30
(theres no good way to tell whether a wheel will fit over the Brembos w/out a test fit) (From what we've seen, most wheels do not fit!)
I know you dont want to spend too much, but if you increase the overall expenditure to $900.00, you can get some new Rotas
Have you ever looked at the 5Zigen FNO1R's (17x9 +35). They fit w/out front spacers? A lot of EvOs run them
(theres no good way to tell whether a wheel will fit over the Brembos w/out a test fit) (From what we've seen, most wheels do not fit!)
I know you dont want to spend too much, but if you increase the overall expenditure to $900.00, you can get some new Rotas
Have you ever looked at the 5Zigen FNO1R's (17x9 +35). They fit w/out front spacers? A lot of EvOs run them
#11
^^^ I like the look, but I doubt they will fit over the front Brembos / Spec shows 17x9 +30
(theres no good way to tell whether a wheel will fit over the Brembos w/out a test fit) (From what we've seen, most wheels do not fit!)
I know you dont want to spend too much, but if you increase the overall expenditure to $900.00, you can get some new Rotas
Have you ever looked at the 5Zigen FNO1R's (17x9 +35). They fit w/out front spacers? A lot of EvOs run them
(theres no good way to tell whether a wheel will fit over the Brembos w/out a test fit) (From what we've seen, most wheels do not fit!)
I know you dont want to spend too much, but if you increase the overall expenditure to $900.00, you can get some new Rotas
Have you ever looked at the 5Zigen FNO1R's (17x9 +35). They fit w/out front spacers? A lot of EvOs run them
Well my problem with the Rotas are the offset. I'd really like to stick to a 17x9 and all the rota offsets are +25, but I'd like to run something closer to +30 if possible.
I have tried to find a set of FN01RCs but they are apparently worth their weight in gold.
Thread
Thread Starter
Forum
Replies
Last Post
Jasoob
09+ Ralliart Engine/Turbo/Drivetrain
5
Jul 4, 2012 02:14 PM
7m6m4
Evo Tires / Wheels / Brakes / Suspension
6
Sep 28, 2006 05:58 PM
kapolani
Evo Tires / Wheels / Brakes / Suspension
7
Mar 9, 2005 08:11 AM