Hey Guys, we just wrapped up this Evo X. This car previously made 363 with a FP red and all the basic bolt ons back in March. This time around we added Kelford Stage 2 Cams, valve springs, headstuds, and an upgraded fuel pump. The gains were very impressive. 397.8 @ 28psi on our Dyno Dynamics on 93 oct! Dyno chart below. Enjoy!

Mod list:


2008 Mitsubishi Evolution X
- Cobb AccessPort
- FP Red
- DW 800cc
- Kelford Stage 2 Cams w/ valvesprings
- Walbro fuel pump
- AMS FMIC
- AMS Upper and lower IC piping
- AMS MBC
- Full exhaust with ams dp & testpipe
- AMS intake
- AMS fuel rail

 

nice numbers

-anthony

 

Very nice!

 

Is that a low reading dyno?

 

How does this compare to mustang dyno #'s such as cbrd or buschur?

 

Yep its a dynamics, my stock pull on a Dyno Dynamics was 230awhp-255tq
just to show you how much power this guy made with just thos parts!!
almost 170awhp gain on a low reading dyno dont forget!

Congrats

 

It's lower reading...dyno dynamics, assuming it is on a 1.0CF, is the lowest reading dyno around.

It isn't a ton lower than a mustang, maybe 3-5%.

The new software like forge has seems to read higher than the old software though, from what I have seen.

 

Well, I guess this one pretty reads spot on with a mustang dyno then if its a 230whp stock one.

Edit: see you have a 2010, seems right I suppose.

 

Very nice numbers for pump.

 

Bad-*** numbers for pump gas! Dyno dynamics numbers are no joke!

 

Yeah, the other guys in this thread pretty much summed it up. Yes, it's a very low reading dyno, typically around 3-5% lower than a Mustang. We always have the dyno set at 1.0 CF, no need to ever change that. Thanks for the nice comments guys

 

Should have a big big turbo EvoX on the blocks here pretty soon too. Thanks guys.

 

Just wanted to give my thanks to Ryan and Sharif at Forged Performance for putting together a strong tune and making my car feel better then ever!! I am completely happy with how the car is runing and how it sounds! The cams really let the FP Red open up and growl. The engine sounds tons more aggressive then before. I dropped the car off, they started working on it right away, it was done when they promised. I really am happy with the work that was done by Sharif and Ryan. Thanks again guys!!

 

Do the 800cc and Walbro provide enough fuel supply for your mods?

 

thats a nice gain