Notices
Evo X Dyno Results Discuss vendor and member dyno tuning techniques, results and graphs.

Forged Performance - Corey's EVO X - 390 whp on a BBX Lite

Thread Tools
 
Search this Thread
 
Old Feb 14, 2011 | 03:37 PM
  #1  
Ryan@Forged's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Sep 2008
Posts: 53
Likes: 0
From: Marietta, GA
Forged Performance - Corey's EVO X - 390 whp on a BBX Lite

Well here's another one! It seems like we're turning these out every week now. On this one, our good friends over at CBRD were nice enough to recommend Corey bring his Evo X to us to install his new CBRD BBX Lite Turbo and CBRD Exhaust Manifold. While the car was here we decided to also add a set of Kelford cams and a few other goodies. With our previous experience tuning these turbos, we expected the power to be slightly less than that of the BBX Full and slightly quicker response. We were right on the money with our expectations. As always CBRD's turbos made impressive mid-range power with exceptional spool. Corey's car made just over 390whp @ 26 pounds of boost on 93 octane. This setup is just too much fun to drive on the street. Mods listed below

- CBRD BBX Lite Turbo
- CBRD Exhaust Manifold
- CBRD FMIC
- ETS IC Piping
- Kelford 214-B Cams
- Kelford Valve Springs
- ARP Headstuds
- Pierburg BC
- AEM Intake
- CPE Turbo Back Exhaust
- Deatschwerks 850cc Fuel Injectors

- ECUflash Tune by Sharif@Forged











Reply
Old Feb 14, 2011 | 03:52 PM
  #2  
TheNEWB's Avatar
Evolving Member
 
Joined: Jul 2009
Posts: 222
Likes: 0
From: Canada
that is a sexy manifold!
Reply
Old Feb 14, 2011 | 04:11 PM
  #3  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
Thanks again for everything guys, I'll be seeing you again soon
Reply
Old Feb 14, 2011 | 04:26 PM
  #4  
smoothevo's Avatar
Evolving Member
iTrader: (3)
 
Joined: Nov 2008
Posts: 440
Likes: 1
From: MD
OK, I'm officially jealous. Car looks way better with those wheels Corey and I see you put some dark *** tint on there too. I'm doing everything I can right now to keep myself from pulling out my credit card....
Reply
Old Feb 14, 2011 | 04:49 PM
  #5  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
Thanks Danny, but don't be jealous...just jump on the bandwagon. I promise you wont regret it!!!
Reply
Old Feb 14, 2011 | 05:49 PM
  #6  
doghead's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2008
Posts: 159
Likes: 0
From: OHIO
Do you think a new O2 housing would have fetched him the coveted 400whp mark? Cpe turbo back tells me no aftermarket O2 housing.
Reply
Old Feb 14, 2011 | 05:55 PM
  #7  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
That's something to look at, i'm thinking of going to the AEM widemouth soon and Tomei titanium exhuast along with the Cobb AP for a little more friendly tuning so we shall see. As you know the Dynamics dyno is rather stingy, i think i would have gotten 400 whp easy on any other dyno

Last edited by sailorcor; Feb 14, 2011 at 06:01 PM.
Reply
Old Feb 14, 2011 | 07:02 PM
  #8  
gklcalo's Avatar
Newbie
 
Joined: Jan 2011
Posts: 6
Likes: 0
From: Puerto Rico
how much for only the manifold ??? Thanks !!
Reply
Old Feb 15, 2011 | 12:14 AM
  #9  
Sharif@Forged's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Mar 2007
Posts: 62
Likes: 0
From: Marietta, GA
Originally Posted by sailorcor
That's something to look at, i'm thinking of going to the AEM widemouth soon and Tomei titanium exhuast along with the Cobb AP for a little more friendly tuning so we shall see. As you know the Dynamics dyno is rather stingy, i think i would have gotten 400 whp easy on any other dyno
Let's not forget we ran out the clock tuning...what a hectic week!
With a little more tweaking, I am certain 400whp was in the bag.

We'll blow right by that mark on your next round...Ryan was filling me in.
Reply
Old Feb 15, 2011 | 02:15 AM
  #10  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
Wink

Originally Posted by Sharif@Forged
Let's not forget we ran out the clock tuning...what a hectic week!
With a little more tweaking, I am certain 400whp was in the bag.

We'll blow right by that mark on your next round...Ryan was filling me in.
Good point, i've never seen so many GT-R's in one place in my life. Thought i was in heaven. Cant wait for round 2, gonna be a fun summer!!!
Reply
Old Feb 15, 2011 | 02:17 AM
  #11  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
Originally Posted by gklcalo
how much for only the manifold ??? Thanks !!
Contact Chad at CBRD for pricing, plus he does free shipping on everything
Reply
Old Feb 15, 2011 | 06:13 AM
  #12  
Ryan@Forged's Avatar
Thread Starter
Former Sponsor
iTrader: (6)
 
Joined: Sep 2008
Posts: 53
Likes: 0
From: Marietta, GA
Originally Posted by doghead
Do you think a new O2 housing would have fetched him the coveted 400whp mark? Cpe turbo back tells me no aftermarket O2 housing.
Yes, I think a new o2 housing would get us to the 400 or very close to it. We are already on the edge

Originally Posted by gklcalo
how much for only the manifold ??? Thanks !!
sent you a PM

Originally Posted by sailorcor
Good point, i've never seen so many GT-R's in one place in my life. Thought i was in heaven. Cant wait for round 2, gonna be a fun summer!!!
Yeah, it's always GTR heaven around here. We usually have 5+ on a slow week

It's definitely going to be a fun summer. Talk to you soon and enjoy the car
Reply
Old Feb 15, 2011 | 06:26 AM
  #13  
CBRD's Avatar
Account Disabled
iTrader: (60)
 
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
Excellent results guys... good to see some other shops loving the BBX line of turbochargers and Im glad you could take care of the installation!

We almost always pair the AMS downpipe/o2 with our turbochargers...it works great, and has a nice flex joint!

Congrats again!

cb
Reply
Old Feb 15, 2011 | 06:47 AM
  #14  
KJ82's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2010
Posts: 529
Likes: 0
From: Iraq; New Jersey
Originally Posted by sailorcor
That's something to look at, i'm thinking of going to the AMS widemouth soon and Tomei titanium exhuast along with the Cobb AP for a little more friendly tuning so we shall see. As you know the Dynamics dyno is rather stingy, i think i would have gotten 400 whp easy on any other dyno

I fixed a little typ-o there up top for you...! Never the less, congrats on your new found set up/ power. You will most definitely enjoy your ride(but your pockets won't if your heavy on the pedal)... Lol... I dig, dig, dig the color too! Want to swap head lights!? Lol... Go on ahead and get us some video footages bro...!

Reply
Old Feb 15, 2011 | 08:17 AM
  #15  
sailorcor's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2009
Posts: 189
Likes: 0
From: Alabama
Lol good catch. I never said I wasn't slightly a tard
Reply



All times are GMT -7. The time now is 05:05 AM.